{"product_id":"clips-pare-soleil-nissan-x-trail-murano-altima-teana","title":"Sun Visor Clips Nissan X-Trail Murano Altima Teana","description":"\u003ch2\u003eNissan car sun visor: the 2 clips that snap the visor back to the ceiling\u003c\/h2\u003e\n\u003cp\u003eOn almost every Nissan model from the last twenty years, the same small roof hook holds the \u003cstrong\u003ecar sun visor\u003c\/strong\u003e in the up position. And on almost every model, it is the first thing to give way: the clip splits, the tab breaks in its housing, and the visor ends up hanging across the field of vision. This set of two clips fixes the problem for a few euros on the X-Trail, Murano, Altima, Teana, Maxima, Pathfinder, Titan, and Quest, as well as the Infiniti QX56, QX60, and JX35.\u003c\/p\u003e\n\u003ch3\u003eA part shared by an entire range of Nissan models\u003c\/h3\u003e\n\u003cp\u003eThis is one of the lesser-known advantages of major manufacturers: this retaining hook is common to very different models, from family SUVs to pickups and sedans. In practical terms, a set bought today for your X-Trail will work just as well on the neighbor's Murano or on a family member's Altima. The neutral color of the plastic blends into both light and dark headliners without creating a point of contrast above the windshield.\u003c\/p\u003e\n\u003cp\u003eThe set of two covers both front visors. This is the most logical format: on vehicles of the same age on both sides, when one hook breaks, the second rarely follows more than a year later. You secure your entire \u003cstrong\u003einterior car sun visor\u003c\/strong\u003e in a single order, without having to come back for more.\u003c\/p\u003e\n\u003ch3\u003ePlastic that retains its grip despite the summers\u003c\/h3\u003e\n\u003cp\u003eThese clips live in the hottest area of the cabin, just below the windshield, where the surface temperature can far exceed that of the air. It is this repeated exposure that makes original plastics brittle after about ten years. The material used here is reinforced and treated to retain its clamping elasticity after thermal cycles, rather than hardening and then splitting at the base.\u003c\/p\u003e\n\u003cp\u003eThe inside of the clip is smooth, with no molding burrs: the visor engages without force and pops out without the edge scratching the trim. The mounting tab, meanwhile, replicates the manufacturer's geometry to lock firmly into the headliner housing, without play or rattling on rough roads. A properly clipped \u003cstrong\u003erigid car sun visor\u003c\/strong\u003e also means a quiet cabin.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eNissan sun visor retaining clips\u003c\/strong\u003e — geometry replicated from the original part.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eSet of 2 pieces\u003c\/strong\u003e — both front visors covered in a single order.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCompatible with Nissan and Infiniti\u003c\/strong\u003e — X-Trail, Murano, Altima, Teana, Titan, Quest, QX56, QX60, JX35.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eUV-resistant reinforced plastic\u003c\/strong\u003e — the clip retains its tension under the heat of the windshield.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eInstallation without disassembly\u003c\/strong\u003e — a few seconds per clip, no special tools required.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eClipping the new hook into your Murano's headliner\u003c\/h3\u003e\n\u003cp\u003eStart by cleaning the housing: debris from the old clip often remains stuck in the metal and prevents the new tab from entering fully. Fine-nose pliers are enough to extract it. Then present the new clip perfectly straight and push with a firm thumb until it clicks. Do not screw it in at an angle and never force it sideways: the headliner trim will be permanently marked. Finally, test it by engaging the visor: it must stay up on its own, without you having to hold it.\u003c\/p\u003e\n\u003cp\u003eThe compatibility list covers a large part of the Nissan range and several Infiniti models. As this family of parts has been produced over a long period, compare the shape of the tab and the opening of the clip with your removed clip before ordering, especially on the most recent model years or imported vehicles.\u003c\/p\u003e\n\u003ch3\u003eWhy does the driver-side clip always break first?\u003c\/h3\u003e\n\u003cp\u003eIt is no coincidence, and it is worth knowing before ordering. The driver's visor is handled several times a day, often cleared from the hook to pivot toward the side window at the end of the day, then hastily put back in place. Each lateral movement spreads the clip much more than simply lifting it vertically, and it is this repeated flexing that fatigues the material. The passenger side, meanwhile, almost never moves. The moral: if your driver-side clip has just given way, keep the second one from the set in reserve rather than installing it right away — you will need it.\u003c\/p\u003e\n\u003ch3\u003eThe interior hardware you can't find anywhere else, all gathered here\u003c\/h3\u003e\n\u003cp\u003eClips, fasteners, hooks, covers: these small parts are always the ones missing when you want to get a car back in top shape, and that is why we stock them with as much care as large styling parts. Verified selection, compatibility listed without exaggeration, and support in French if you are unsure about your model.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdd this set of 2 clips to your order and make the hanging visor disappear starting tonight.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Sun visor retaining clips\u003cbr\u003e\n\u003cstrong\u003eCompatible brand \/ model:\u003c\/strong\u003e Nissan X-Trail, Murano, Altima, Teana, Maxima, Pathfinder, Titan, Quest; Infiniti QX56, QX60, JX35\u003cbr\u003e\n\u003cstrong\u003eYears:\u003c\/strong\u003e Depending on version\u003cbr\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Set of 2 clips\u003cbr\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Headliner, front visor hook\u003cbr\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-treated reinforced plastic\u003cbr\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Direct clipping into the original housing\u003cbr\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e A few seconds, no special tools required — check depending on version\u003cbr\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% New\u003cbr\u003e\n\u003cstrong\u003eMain function:\u003c\/strong\u003e Keep the visor locked against the headliner\u003c\/p\u003e\n\u003c!--v3.1--\u003e","brand":"becquet-voiture.com","offers":[{"title":"Set of 2 Clips","offer_id":52809183232287,"sku":"\u003cnone\u003e","price":31.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/7911\/7343\/files\/Se927d835da974215a945463c078a45c1v.webp?v=1787630311","url":"https:\/\/becquet-voiture.com\/en\/products\/clips-pare-soleil-nissan-x-trail-murano-altima-teana","provider":"Becquet Voiture","version":"1.0","type":"link"}