{"product_id":"feux-antibrouillard-led-kia-optima-k5-2016-2018","title":"LED Fog Lights Kia Optima K5 2016-2018","description":"\u003ch2\u003eKia Optima K5 LED fog lights: the complete unit, not just the bulb\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003eLED fog light\u003c\/strong\u003e is a \u003cstrong\u003ecomplete unit\u003c\/strong\u003e: the lens, reflector, and light source form a single assembly that replaces the original fog light in the front bumper. It is available for the \u003cstrong\u003eKia Optima K5\u003c\/strong\u003e models from \u003cstrong\u003e2016 to 2018\u003c\/strong\u003e, in your choice of \u003cstrong\u003edriver side\u003c\/strong\u003e, \u003cstrong\u003epassenger side\u003c\/strong\u003e, or as a \u003cstrong\u003epair\u003c\/strong\u003e. You are not changing a bulb in a yellowed housing: you are replacing the entire assembly.\u003c\/p\u003e\n\u003ch3\u003eWhy replace the unit rather than the light source\u003c\/h3\u003e\n\u003cp\u003eOn a sedan approaching ten years old, the problem is almost never the light source alone. It is the lens that becomes clouded, the reflector that loses its silvering, and the seal that lets in moisture—hence the persistent condensation inside the unit. Changing only the light source in a worn housing restores neither the beam pattern nor the cut-off. Replacing the \u003cstrong\u003ecomplete fog light unit\u003c\/strong\u003e starts with a new lens and a new seal.\u003c\/p\u003e\n\u003ch3\u003eChoosing the correct side\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eDriver side (left)\u003c\/strong\u003e — one unit, for left-hand drive vehicles in France.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePassenger side (right)\u003c\/strong\u003e — one unit, curb side.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eLeft + right pair\u003c\/strong\u003e — two units, the logical solution if both lenses are the same age.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eClear light color\u003c\/strong\u003e — advertised as white by the supplier.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e12 V \/ 24 V power supply\u003c\/strong\u003e — according to the supplier's specifications.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eA piece of advice that applies to all lighting: if you replace only one side, the difference in color and intensity with the remaining lens will be noticeable. The \u003cstrong\u003epair\u003c\/strong\u003e avoids the \"black eye\" effect.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications of the fog light unit\u003c\/h3\u003e\n\u003cp\u003eComplete assembly of \u003cstrong\u003elens + LED light source\u003c\/strong\u003e, designed to fit into the original location in the Optima K5 \u003cstrong\u003efront bumper\u003c\/strong\u003e. Advertised voltage: \u003cstrong\u003e12 V \/ 24 V\u003c\/strong\u003e, color: \u003cstrong\u003eclear\u003c\/strong\u003e. Supplier model reference: \u003cstrong\u003eWuD-QiY-G6138\u003c\/strong\u003e. Supplier's target vehicle version: \u003cstrong\u003e2.0 L\u003c\/strong\u003e. Each package contains one unit, except for the pair option, which contains two.\u003c\/p\u003e\n\u003ch3\u003eInstallation and approval: read this before ordering\u003c\/h3\u003e\n\u003cp\u003eInstallation is done through the wheel arch access or the bumper panel, depending on the version, by unclipping the trim and then disconnecting the wiring harness. Allow thirty minutes per side. Essential point: an aftermarket lighting unit can only be used on public roads if it bears a visible \u003cstrong\u003eEuropean approval marking\u003c\/strong\u003e on the lens. No E marking is claimed for this item: check the part upon receipt, as non-approved lighting or an improperly cut-off beam will result in a \u003cstrong\u003efailed technical inspection re-test\u003c\/strong\u003e and can dazzle other road users. Have the beam height adjusted after installation.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions about fog lights\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhen should front fog lights be used?\u003c\/strong\u003e\u003cbr\u003e\nIn fog, heavy rain, or snowfall. They are prohibited in clear weather, both day and night.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does my fog light fog up?\u003c\/strong\u003e\u003cbr\u003e\nThe housing's waterproof seal has deteriorated. Condensation eventually damages the reflector: it is time to replace the unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould both sides be replaced at the same time?\u003c\/strong\u003e\u003cbr\u003e\nIt is not mandatory, but highly recommended to maintain two beams of the same color and intensity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes an LED run cooler than a halogen bulb?\u003c\/strong\u003e\u003cbr\u003e\nThe light source runs cooler on the surface, but its heat sink must remain unobstructed. Never seal the back of the unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this unit fit an Optima from a different year?\u003c\/strong\u003e\u003cbr\u003e\nThe bumper cutout has changed over successive facelifts. Compare the shape of your lens with the photos before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRestore a sharp beam and a clean front end: choose your side or the pair and order now.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Complete LED fog light unit (lens + light source)\u003cbr\u003e\n\u003cstrong\u003eCompatible vehicle:\u003c\/strong\u003e Kia Optima K5, 2.0 L version — depending on the bumper, to be verified\u003cbr\u003e\n\u003cstrong\u003eYears:\u003c\/strong\u003e 2016 to 2018\u003cbr\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Driver side, passenger side, or pair\u003cbr\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 1 unit, or 2 units for the pair option\u003cbr\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 V \/ 24 V\u003cbr\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Clear\u003cbr\u003e\n\u003cstrong\u003eSupplier reference:\u003c\/strong\u003e WuD-QiY-G6138\u003cbr\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e Front bumper, original housing\u003cbr\u003e\n\u003cstrong\u003eApproval:\u003c\/strong\u003e No E marking claimed — to be checked before use on public roads\u003cbr\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% New\u003c\/p\u003e\n\u003c!--v3.1--\u003e","brand":"becquet-voiture.com","offers":[{"title":"Passenger Side (Right) - 1 Piece","offer_id":52861424632095,"sku":"136:10#2.0L Only 1 Right","price":191.9,"currency_code":"EUR","in_stock":true},{"title":"Driver's Side (Left) - 1 Unit","offer_id":52861424664863,"sku":"136:200002573#2.0L Only 1 Left","price":191.9,"currency_code":"EUR","in_stock":true},{"title":"Left + Right Pair - 2 Blocks","offer_id":52861424697631,"sku":"136:175#2.0L Left and Right","price":347.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/7911\/7343\/files\/Sff9ed54d353c4735843b443697800480L.webp?v=1788858856","url":"https:\/\/becquet-voiture.com\/en\/products\/feux-antibrouillard-led-kia-optima-k5-2016-2018","provider":"Becquet Voiture","version":"1.0","type":"link"}