{"product_id":"feux-de-plaque-led-seat-leon-ibiza-altea","title":"LED License Plate Lights Seat Leon Ibiza Altea","description":"\u003ch2\u003eSeat Leon, Ibiza and Altea LED license plate lights: a clear rear end at night\u003c\/h2\u003e\n\u003cp\u003eThese \u003cstrong\u003eSeat LED license plate lights\u003c\/strong\u003e replace the original bulb modules and transform the rear of your car from a yellowish glow to a clean, even white. On a Leon parked under a streetlight or an Ibiza reversing down a dark driveway, the difference is striking: the license plate is clearly visible, and the entire bumper looks more refined. It is one of the few details that costs little and is immediately noticeable, from the very first night out.\u003c\/p\u003e\n\u003ch3\u003eThe 6000K white of this license plate module on a Leon or Ibiza Cupra\u003c\/h3\u003e\n\u003cp\u003eThe chosen shade is a \u003cstrong\u003esuper bright 6000K white\u003c\/strong\u003e, deliberately close to that of the LED daytime running lights fitted as standard on recent Seat models. The result: the rear of the vehicle regains a consistent color with the front, where the original W5W bulb tends toward orange and betrays the car's age. On an \u003cstrong\u003eIbiza Cupra or Bocanegra\u003c\/strong\u003e, this clean light highlights the bumper's contours and makes the license plate stand out instead of washing it out.\u003c\/p\u003e\n\u003cp\u003eThe housing is black, the exact size of the original module (78 x 27 x 22 mm), and fits into the same housing without any play or need for additional spacers. Seen from the outside, nothing protrudes: you only see the result, not the accessory.\u003c\/p\u003e\n\u003ch3\u003eIntegrated Canbus, 3 W and 12 V: the technology behind this Seat license plate light\u003c\/h3\u003e\n\u003cp\u003eEach module features a voltage stabilizer and an integrated decoder. In practical terms, these are \u003cstrong\u003eerror-free LED license plate lights\u003c\/strong\u003e: no resistors to wire up, no extra cable to run, and no message on the dashboard of Seat models equipped with a CAN network. Power consumption drops to 3 W for a significantly higher intensity than the original bulb, which also reduces the load on the rear electrical circuit.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e6000K white LED license plate light\u003c\/strong\u003e — a clean light that makes the license plate perfectly visible at night\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eError-free Canbus LED module\u003c\/strong\u003e — integrated decoder, no fault light on the instrument panel\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eDirect replacement without modification\u003c\/strong\u003e — same dimensions as the original module, no drilling required\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e12 V T10 (W5W \/ 194) interface\u003c\/strong\u003e — standard connector, 128 mm cable length\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eReduced 3 W power consumption\u003c\/strong\u003e — less load on the alternator, longer lifespan\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eSupplied as a pair\u003c\/strong\u003e — both sides replaced at once for a consistent color\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eFitting these license plate lights on an Altea XL, Exeo or Leon\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eInstalling the LED license plate lights\u003c\/strong\u003e requires a flat-head screwdriver and no more than fifteen minutes. Gently unclip the original module from the tailgate or bumper, disconnect the connector, position the new module in the same orientation, then push it back until it clicks. Work on both sides one after the other. Once the ignition is turned on, the result is immediately visible. Compatibility stated: Altea (XL \/ Freetrack models) from 2007 onwards, Exeo and Exeo ST from 2009 onwards, Ibiza (Cupra \/ Bocanegra \/ FR) from 2009 onwards, Leon and Leon 4 from 2006 onwards — to be checked according to the version before installation, as the housings evolved during production.\u003c\/p\u003e\n\u003ch3\u003eIs an additional decoder needed to prevent a warning light on the dashboard?\u003c\/h3\u003e\n\u003cp\u003eNo. That is precisely what the integrated decoder version is designed for: the voltage stabilizer in each module simulates the power consumption expected by the control unit. You therefore do not need an external decoder or ballast resistor. If a lighting fault still persists, it will almost always be due to a poorly seated connector or an oxidized bulb holder on a car exposed to moisture — a point to check before suspecting the module.\u003c\/p\u003e\n\u003ch3\u003eYour Seat rear LEDs, chosen by car enthusiasts\u003c\/h3\u003e\n\u003cp\u003eAt Becquet Voiture, lighting is one of the product categories we monitor closely, because a poorly chosen \u003cstrong\u003eLED license plate bulb\u003c\/strong\u003e is immediately noticeable: a bluish tint, a protruding module, or a warning light. We prefer complete modules to simple bulbs, as they are more stable over time and look much cleaner. Have a question about compatibility with your model year? Our French team will answer it before you place your order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGive your Seat a clean, bright rear end: order your pair of LED license plate lights today.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eType:\u003c\/strong\u003e LED license plate light module\u003cbr\u003e\n\u003cstrong\u003eBrand \/ Compatible models:\u003c\/strong\u003e Seat Altea XL and Freetrack (2007-), Exeo and Exeo ST (2009-), Ibiza Cupra \/ Bocanegra \/ FR (2009-), Leon and Leon 4 (2006-)\u003cbr\u003e\n\u003cstrong\u003eYears:\u003c\/strong\u003e Depending on version — to be checked before installation\u003cbr\u003e\n\u003cstrong\u003eLight source:\u003c\/strong\u003e White LEDs\u003cbr\u003e\n\u003cstrong\u003eColor temperature:\u003c\/strong\u003e 6000 K white\u003cbr\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 3 W\u003cbr\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 V DC\u003cbr\u003e\n\u003cstrong\u003eInterface type:\u003c\/strong\u003e T10 (W5W \/ 194)\u003cbr\u003e\n\u003cstrong\u003eDecoder:\u003c\/strong\u003e Integrated Canbus, error-free\u003cbr\u003e\n\u003cstrong\u003eHousing color:\u003c\/strong\u003e Black\u003cbr\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 78 x 27 x 22 mm (L x W x H)\u003cbr\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 128 mm\u003cbr\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 80 g\u003cbr\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 pair (2 modules)\u003cbr\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Direct replacement, no wiring modification\u003c\/p\u003e\n\u003c!--v3.1--\u003e","brand":"becquet-voiture.com","offers":[{"title":"1 Pair","offer_id":52841132327199,"sku":"\u003cnone\u003e","price":75.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/7911\/7343\/files\/S7eb645804457442aa38c1342cdc7db88Z.webp?v=1788281892","url":"https:\/\/becquet-voiture.com\/en\/products\/feux-de-plaque-led-seat-leon-ibiza-altea","provider":"Becquet Voiture","version":"1.0","type":"link"}