{"product_id":"lame-avant-ford-focus-mk3-2012-2018-kit-3-pieces","title":"Front Blade Ford Focus MK3 2012-2018 3-Piece Kit","description":"\u003ch2\u003eFord Focus MK3 front lip: the low line the front end was missing\u003c\/h2\u003e\n\u003cp\u003eA \u003cstrong\u003efront lip\u003c\/strong\u003e is an add-on that extends the bottom of the bumper towards the ground and forward. This \u003cstrong\u003e3-piece\u003c\/strong\u003e kit is available for the \u003cstrong\u003eFord Focus MK3\u003c\/strong\u003e from \u003cstrong\u003e2012 to 2018\u003c\/strong\u003e: a central section and two corner extensions that taper towards the wheel arches. Once assembled, the set covers a width of \u003cstrong\u003e167 cm\u003c\/strong\u003e. The effect is immediate: the car looks lower and wider without touching the suspension.\u003c\/p\u003e\n\u003ch3\u003eThree pieces instead of one: why it's an advantage\u003c\/h3\u003e\n\u003cp\u003eA one-piece \u003cstrong\u003efront splitter\u003c\/strong\u003e is a single unit: the slightest difference in the bumper's curvature creates a visible gap. Here, the central section is fitted first, then each corner is adjusted independently to follow the bumper's taper towards the wing. This is also an advantage in the event of a parking bump: you replace the damaged corner without removing the entire assembly. The profile is designed low but flexible, which limits damage on the first poorly negotiated speed bump.\u003c\/p\u003e\n\u003ch3\u003eThe three available finishes\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cstrong\u003eMatte black\u003c\/strong\u003e — the most discreet finish, it blends into the bottom of the bumper of most Focus models.\n\u003cli\u003e\n\n\u003cstrong\u003eGlossy black\u003c\/strong\u003e — the lacquered effect of sports packs, superb on a clean car, more demanding to maintain.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eCarbon look\u003c\/strong\u003e — the woven pattern of custom builds, without the price or fragility of composite.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBumper protection\u003c\/strong\u003e — the lip absorbs curb rubs instead of the paint.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eReversible installation\u003c\/strong\u003e — nothing is permanent if you resell the vehicle.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eExact dimensions of the front lip kit\u003c\/h3\u003e\n\u003cp\u003eCentral section: \u003cstrong\u003e75 cm\u003c\/strong\u003e long by \u003cstrong\u003e11.5 cm\u003c\/strong\u003e deep. Corner extensions: \u003cstrong\u003e64 cm\u003c\/strong\u003e long, with a profile that goes from \u003cstrong\u003e11 cm\u003c\/strong\u003e to \u003cstrong\u003e5.5 cm\u003c\/strong\u003e wide along the length. Total width once the three elements are assembled: \u003cstrong\u003e167 cm\u003c\/strong\u003e, including \u003cstrong\u003e81 cm\u003c\/strong\u003e for the visible central part. These are the dimensions you need to compare with the width of the bottom of your vehicle's bumper — they matter more than the stated year.\u003c\/p\u003e\n\u003ch3\u003eFitting the lip without removing the bumper\u003c\/h3\u003e\n\u003cp\u003eThe installation is done with the bumper in place, wheels turned to clear the wheel arches. We do a dry fit, mark the mounting points, degrease with alcohol, then combine \u003cstrong\u003eself-tapping screws\u003c\/strong\u003e and \u003cstrong\u003edouble-sided adhesive\u003c\/strong\u003e along the lip. Work at a temperature of at least \u003cstrong\u003e15 °C\u003c\/strong\u003e: below that, the adhesive does not bond and the lip will peel off at the first high-pressure wash. Allow one to two hours. Compatibility stated for the \u003cstrong\u003eFocus MK3\u003c\/strong\u003e: check your bumper before ordering, phase 1 and phase 2 do not have the same front lower body design.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions about bumper lips\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a front lip for?\u003c\/strong\u003e\u003cbr\u003e\nAesthetically, it visually lowers the front end. In use, it protects the bottom of the bumper from curb rubs. The aerodynamic effect on the open road remains marginal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a front lip approved?\u003c\/strong\u003e\u003cbr\u003e\nAn exterior addition must not create a dangerous protrusion or a sharp edge. A flexible lip fitted under the bumper remains within common use, but the technical inspection remains the sole judge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you need to drill the bumper?\u003c\/strong\u003e\u003cbr\u003e\nThe self-tapping screws fit into the lower lip of the bumper, a non-visible area. Mounting on adhesive alone is possible but less durable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the lip survive a speed bump?\u003c\/strong\u003e\u003cbr\u003e\nThe material is flexible and regains its shape after light contact. Speed bumps that are too high should still be approached at an angle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you paint the lip?\u003c\/strong\u003e\u003cbr\u003e\nYes, after fine sanding and plastic primer, if you want the body color.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLower the line of your Focus in one hour: choose your finish and order your 3-piece front lip kit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Add-on front lip (splitter), 3-piece kit\u003cbr\u003e\n\u003cstrong\u003eStated vehicle:\u003c\/strong\u003e Ford Focus MK3 — depending on the bumper, to be checked\u003cbr\u003e\n\u003cstrong\u003eYears:\u003c\/strong\u003e 2012 to 2018\u003cbr\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 3 pieces (1 central + 2 corners)\u003cbr\u003e\n\u003cstrong\u003eCentral length:\u003c\/strong\u003e 75 cm × 11.5 cm\u003cbr\u003e\n\u003cstrong\u003eCorner length:\u003c\/strong\u003e 64 cm, profile from 11 cm to 5.5 cm\u003cbr\u003e\n\u003cstrong\u003eTotal width installed:\u003c\/strong\u003e 167 cm\u003cbr\u003e\n\u003cstrong\u003eFinishes:\u003c\/strong\u003e Matte black, glossy black, carbon look\u003cbr\u003e\n\u003cstrong\u003eFixing:\u003c\/strong\u003e Self-tapping screws and double-sided adhesive\u003cbr\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Without bumper removal, from 15 °C\u003cbr\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% New\u003c\/p\u003e\n\u003c!--v3.1--\u003e","brand":"becquet-voiture.com","offers":[{"title":"Carbon Look","offer_id":52861425058079,"sku":"14:200004890#Carbon Fiber Look","price":335.9,"currency_code":"EUR","in_stock":true},{"title":"Matte Black","offer_id":52861425090847,"sku":"14:200004891#Matte Black","price":314.9,"currency_code":"EUR","in_stock":true},{"title":"Gloss Black","offer_id":52861425123615,"sku":"14:200004889#Glossy Black","price":324.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/7911\/7343\/files\/S1ba60af314ae447e99ad6b76dbff2867U.webp?v=1788858857","url":"https:\/\/becquet-voiture.com\/en\/products\/lame-avant-ford-focus-mk3-2012-2018-kit-3-pieces","provider":"Becquet Voiture","version":"1.0","type":"link"}