{"product_id":"levier-vitesses-court-suzuki-swift-sport-zc32s-zc33s","title":"Short Shift Knob Suzuki Swift Sport ZC32S ZC33S 6-Speed","description":"\u003c!--v3.1--\u003e\n\u003ch2\u003eSuzuki Swift Sport ZC32S ZC33S Short Shifter: a gearbox that snaps into place instead of floating\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003eshort shifter\u003c\/strong\u003e replaces the original control for the \u003cstrong\u003e6-speed\u003c\/strong\u003e gearbox in the \u003cstrong\u003eSuzuki Swift Sport ZC32S\u003c\/strong\u003e and \u003cstrong\u003eZC33S\u003c\/strong\u003e. The principle of a \u003cstrong\u003eshort shifter\u003c\/strong\u003e is purely mechanical: by moving the pivot point, it shortens the \u003cstrong\u003elever throw\u003c\/strong\u003e while slightly increasing the effort required. The result is immediate, hand on the knob: shorter, crisper shifts, and a third gear that no longer requires letting go of the steering wheel.\u003c\/p\u003e\n\n\u003ch3\u003eWhat a reduced-throw gearbox control changes\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eShortened throw\u003c\/strong\u003e: the hand's travel between two gears is significantly reduced, both fore-and-aft and laterally.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePlay-free guidance\u003c\/strong\u003e: new ball joints and bushings eliminate the characteristic play of a worn original shifter assembly.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eSolid-machined aluminium\u003c\/strong\u003e: much stiffer than the original stamped sheet metal plate.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eMore precise shifts\u003c\/strong\u003e: the engagement is noticeable, and missed shifts become rare, even under hard acceleration.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eNo-weld installation\u003c\/strong\u003e: the assembly replaces the original control, with all hardware provided.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eReversible\u003c\/strong\u003e: the original control can be reinstalled at any time, preserving the vehicle's resale value.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eSwift Sport short shifter: who is it for, and what is it used for?\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003eshort shifter kit\u003c\/strong\u003e is primarily aimed at those who drive: track days, mountain roads, regularity rallies, or simply a ZC33S used for everyday spirited driving. It is one of the few modifications that can be felt from the very first kilometre, without affecting the engine or exhaust, and without impacting the vehicle's homologation. On a high-mileage ZC32S, it also corrects the play accumulated by the original \u003cstrong\u003eshifter assembly\u003c\/strong\u003e. For purely urban use, be aware that the effort required to shift increases slightly: this is the normal trade-off for a reduced throw.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Anodised, solid-machined aluminium. \u003cstrong\u003eFinish:\u003c\/strong\u003e Black. \u003cstrong\u003eApplication:\u003c\/strong\u003e Swift Sport ZC32S and \u003cstrong\u003eZC33S\u003c\/strong\u003e, 6-speed manual gearbox. \u003cstrong\u003eEffect:\u003c\/strong\u003e Reduced throw when selecting and engaging gears. \u003cstrong\u003eJoints:\u003c\/strong\u003e New ball joints and bushings provided. \u003cstrong\u003eHardware:\u003c\/strong\u003e Included. \u003cstrong\u003eWelding:\u003c\/strong\u003e None. \u003cstrong\u003eInstallation:\u003c\/strong\u003e Reversible to the original control.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and maintenance\u003c\/h3\u003e\n\u003cp\u003eInstallation is carried out from inside the cabin. Remove the boot and centre console, disconnect the battery, free the linkages from the original control, then replace the short plate using the same mounting points. Tighten to torque specifications without seizing the ball joints. Allow \u003cstrong\u003e1.5 to 2 hours\u003c\/strong\u003e for a careful mechanic, and a little longer the first time. Before reassembling the console, cycle through all gears with the engine off to check the \u003cstrong\u003eshift pattern\u003c\/strong\u003e and reverse gear. Maintenance: one drop of grease on the ball joints once a year. Compatibility should be checked according to the year of manufacture before installation.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBy how much is the throw reduced?\u003c\/strong\u003e\u003cbr\u003eThe reduction is approximately one-third of the original throw, both fore-and-aft and laterally. The effect is immediately noticeable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the original knob be reinstalled on it?\u003c\/strong\u003e\u003cbr\u003eYes, the shaft retains the standard Swift Sport threading. You can keep your knob or freely change it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes a short shifter damage the gearbox?\u003c\/strong\u003e\u003cbr\u003eNo, when correctly set up. It is forced shifting without depressing the clutch, short shifter or not, that wears out the synchros.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the centre console need to be modified?\u003c\/strong\u003e\u003cbr\u003eNo, no cutting is required. The console is reassembled as is.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it compatible with an automatic gearbox?\u003c\/strong\u003e\u003cbr\u003eNo. This kit is exclusively designed for the 6-speed manual gearbox.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the effort required to shift increase?\u003c\/strong\u003e\u003cbr\u003eSlightly, as this is the mechanical trade-off for the reduced throw. Most drivers find the compromise more pleasant from the very first few kilometres.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eShort, engaged shifts with no play or floater, for a reversible modification that can be felt from the very first corner: equip your Swift Sport.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Short shifter\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Suzuki Swift Sport ZC32S and ZC33S\u003cbr\u003e\u003cstrong\u003eGearbox:\u003c\/strong\u003e 6-speed manual\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Anodised, solid-machined aluminium\u003cbr\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Black\u003cbr\u003e\u003cstrong\u003eJoints:\u003c\/strong\u003e Ball joints and bushings provided\u003cbr\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e No welding, hardware included\u003cbr\u003e\u003cstrong\u003eFitting time:\u003c\/strong\u003e 1.5 to 2 hours\u003cbr\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% New\u003c\/p\u003e","brand":"becquet-voiture.com","offers":[{"title":"Black Machined Aluminum","offer_id":52861455270175,"sku":"14:193#Short Shifter","price":590.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/7911\/7343\/files\/Sbff580996e8a427f95e6e639058ec060J.webp?v=1788859135","url":"https:\/\/becquet-voiture.com\/en\/products\/levier-vitesses-court-suzuki-swift-sport-zc32s-zc33s","provider":"Becquet Voiture","version":"1.0","type":"link"}