{"product_id":"verins-hayon-peugeot-208-mk1-2012-2020-paire","title":"Peugeot 208 Mk1 2012-2020 Tailgate Struts Pair 2 Pieces","description":"\u003c!--v3.1--\u003e\n\u003ch2\u003ePeugeot 208 tailgate struts — a boot that finally stays open\u003c\/h2\u003e\n\u003cp\u003eThese \u003cstrong\u003etailgate struts\u003c\/strong\u003e for the \u003cstrong\u003ePeugeot 208 Mk1\u003c\/strong\u003e restore the boot's original support. The \u003cstrong\u003e208 boot strut\u003c\/strong\u003e is a wear part: after eight to ten years, the tailgate drops on its own as soon as it gets cold, and eventually all year round. The \u003cstrong\u003epair of 2 pieces\u003c\/strong\u003e comes complete, with the same mounting geometry as the original \u003cstrong\u003egas springs\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhy replace both boot struts at once\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eSupplied as a pair of 2 pieces\u003c\/strong\u003e: both have undergone the same number of cycles; replacing only one side means having to do it again in a few months.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eNitrogen-pressurised gas spring\u003c\/strong\u003e: the push remains consistent throughout the entire opening stroke, with no hard point at the end of opening.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eBlack-finished steel body\u003c\/strong\u003e: the part lives under the spoiler, exposed to road spray and salt.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePolished chrome-plated steel rod\u003c\/strong\u003e: it protects the sealing gasket, which is the real limiting factor for the lifespan of a \u003cstrong\u003eboot shock absorber\u003c\/strong\u003e.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eSnap-fit ball joint ends\u003c\/strong\u003e on the original ball joints, without drilling or modification.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e15-minute installation\u003c\/strong\u003e with a simple flat-head screwdriver, without removing any trim.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eWhy does a tailgate strut fail on a 208\u003c\/h3\u003e\n\u003cp\u003eA \u003cstrong\u003egas strut\u003c\/strong\u003e is a cylinder filled with pressurised nitrogen. Its force depends directly on this pressure and the temperature. Over the years, the rod seal dries out and allows the gas to leak: the energy reserve drops, and the \u003cstrong\u003etailgate falls back on its own\u003c\/strong\u003e. The cold accentuates the phenomenon, which is why the failure almost always appears between November and February. On a \u003cstrong\u003e208 phase 1\u003c\/strong\u003e as well as a \u003cstrong\u003ephase 2\u003c\/strong\u003e, the symptom is the same: the boot still opens but no longer stays in the raised position, then eventually does not open at all. A greasy trace on the rod or a \u003cstrong\u003esqueaking strut\u003c\/strong\u003e confirms the diagnosis without disassembly.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cp\u003eType: \u003cstrong\u003egas tailgate struts\u003c\/strong\u003e, also called \u003cstrong\u003eboot shock absorbers\u003c\/strong\u003e. Quantity: \u003cstrong\u003e2 pieces\u003c\/strong\u003e, left side and right side. Body: \u003cstrong\u003eblack-treated steel\u003c\/strong\u003e. Rod: \u003cstrong\u003echrome-plated steel\u003c\/strong\u003e. Mounting: \u003cstrong\u003eball joint ends\u003c\/strong\u003e with safety clips. Vehicle: \u003cstrong\u003ePeugeot 208 Mk1\u003c\/strong\u003e, model years \u003cstrong\u003e2012 to 2020\u003c\/strong\u003e, \u003cstrong\u003e3 and 5-door\u003c\/strong\u003e. Tools: \u003cstrong\u003eflat-head screwdriver only\u003c\/strong\u003e. Condition: \u003cstrong\u003e100% new\u003c\/strong\u003e. Compatibility should be checked according to the version before installation.\u003c\/p\u003e\n\u003ch3\u003eInstallation and maintenance\u003c\/h3\u003e\n\u003cp\u003eAllow \u003cstrong\u003e15 minutes for both sides\u003c\/strong\u003e. Open the tailgate fully and prop it up with a handle or get help: an unsupported tailgate falls quickly and heavily. Slide the tip of a \u003cstrong\u003ethin flat-head screwdriver\u003c\/strong\u003e under the safety clip of the upper ball joint, lift it by just half a centimetre, then pull the strut towards you. Repeat at the bottom. Mount the new one with the \u003cstrong\u003erod facing downwards\u003c\/strong\u003e: this is the orientation that keeps the oil in contact with the seal and extends its lifespan. Re-clip it, check that the clips have properly reseated, then test three full openings. No maintenance thereafter: simply wipe the rod after winter to remove the salt.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you change the boot struts on a 208?\u003c\/strong\u003e\u003cbr\u003eWith the tailgate open and propped up, lift the clip of each ball joint with a flat-head screwdriver and unclip it. No special tools, no trim removal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould you change both struts at the same time?\u003c\/strong\u003e\u003cbr\u003eYes. Mounting a new strut opposite a worn strut creates an asymmetrical load on the hinge and wears out the new part faster.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does my tailgate no longer stay up only in winter?\u003c\/strong\u003e\u003cbr\u003eThe cold causes the internal nitrogen pressure to drop. A strut that is already weak falls below the support threshold at the first frosts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these struts suitable for the 208 phase 2?\u003c\/strong\u003e\u003cbr\u003eYes, the reference covers the \u003cstrong\u003efirst-generation 208\u003c\/strong\u003e from 2012 to 2020, phase 1 and phase 2. Compare the length with your removed part if in doubt.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you repair a tailgate strut instead of replacing it?\u003c\/strong\u003e\u003cbr\u003eNo, the body is sealed, and refilling with gas is not provided for. Replacement is the only lasting repair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFifteen minutes, a screwdriver, and your boot will stay open on its own again.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eType:\u003c\/strong\u003e Gas tailgate struts\u003cbr\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 pieces (pair)\u003cbr\u003e\u003cstrong\u003eVehicle:\u003c\/strong\u003e Peugeot 208 Mk1, 2012-2020\u003cbr\u003e\u003cstrong\u003eBody:\u003c\/strong\u003e Black-treated steel\u003cbr\u003e\u003cstrong\u003eRod:\u003c\/strong\u003e Chrome-plated steel\u003cbr\u003e\u003cstrong\u003eMounting:\u003c\/strong\u003e Original ball joint ends\u003cbr\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e 15 minutes, flat-head screwdriver\u003cbr\u003e\u003cstrong\u003eCondition:\u003c\/strong\u003e 100% New\u003c\/p\u003e","brand":"becquet-voiture.com","offers":[{"title":"Pair of 2 Pieces","offer_id":52861460709663,"sku":"\u003cnone\u003e","price":116.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/7911\/7343\/files\/H4571633dd0214eb080fd688c831d7f6eW.webp?v=1788859190","url":"https:\/\/becquet-voiture.com\/en\/products\/verins-hayon-peugeot-208-mk1-2012-2020-paire","provider":"Becquet Voiture","version":"1.0","type":"link"}