Ford Ranger T6 T7 T8 roof bars: your pickup finally gets a truly useful roof
A Ford Ranger roof bar changes the pickup's purpose even before it is put to use. The bare, flat, and smooth roof of a standard Ranger serves no purpose: neither for a weekend bike nor a camping rack, LED bar, nor roof box. These Ford Ranger T6 roof bars add the longitudinal lines that the silhouette lacks, transforming a decorative roof into a cargo surface. At first glance, your Ranger goes from a standard pickup to a prepared 4x4, ready to go.
The longitudinal line that redefines the Ranger PX2 MK2 cab
The profile follows the edge of the roof exactly: no bumps, no unsightly overhang, a taut line from the back of the windshield to the rear window. Seen from a three-quarter angle, the assembly visually elongates the cab and gives the Ford Ranger Wildtrak that tall, boxy look associated with expedition vehicles. The black finish matches the handles, mirrors, and dark rims of recent trims; it remains discreet by day and highlights the roof at night.
On a Ford Ranger Raptor or an XLT trim, the effect is immediate: the vehicle appears wider, more planted on its wheels, and the eye no longer stops on the large void of the roof. It is one of the few accessories that provides both style and real functionality.
Aluminum and ABS: what these pickup roof bars are really worth
The manufacturer offers this model in two constructions depending on the version: OEM-style aluminum profile for screw-in mounting, and reinforced ABS plastic for the adhesive variant. Aluminum does not rust and withstands the freeze-thaw cycles of mountain winters; UV-treated ABS retains its deep black without turning white over the years. Both constructions follow the original geometry of the Ranger roof, manufacturer reference FR02.
- Ford Ranger 2012-2021 roof bars — covers the T6, T7, and T8 generations, as well as the PX1, PX2, MK1, and MK2 designations.
- Drill-free mounting — the screw-in version reuses the roof's original holes, without drilling the sheet metal.
- OEM-style aluminum profile — factory look, without visible thickness from the ground.
- Rack mounting base — then accepts crossbars, a basket, or a roof box depending on your use.
- Uniform black finish — matches the window trim bars and black arches of the Wildtrak trims.
Installing your roof bars on a Ranger T7 or T8 without any unpleasant surprises
The mounting of roof bars on the Ford Ranger is done by two people, with a clean and dry cab. The screw-in version is positioned on the anchor points already present under the roof covers: remove the covers, position the bar, and tighten gradually from front to back. The adhesive version sticks directly to the degreased roof, which requires installation in mild temperatures and curing time before any loading. Allow one hour in the workshop for a clean result.
The stated compatibility covers Rangers from 2012 to 2021 depending on the version and market: some model years differ from one country to another, so it is therefore prudent to compare the shape of your vehicle's roof before ordering.
Can you load directly on these Ranger roof bars?
No, and this is an important point. These longitudinal roof bars make up the mounting base: they then receive crossbars, a basket, or a box. Loading an object directly across the two side rails distributes the forces poorly. Always refer to the maximum roof load indicated by the manufacturer for your Ranger, including cargo, and drive moderately with a loaded roof.
Equip the roof of your pickup with a French specialist
At Becquet Voiture, pickup roof and bodywork parts hold a special place: they are the ones that are most visible and forgive the least when it comes to cutting corners. We select pickup roof bars whose geometry truly matches the original roof, and our team answers in French both before and after purchase. Your Ranger deserves better than an empty roof.
Equip the roof of your Ford Ranger now and finally open the door to bikes, roof boxes, and loaded departures.
Type: Longitudinal roof bars for pickup
Compatible brand / model: Ford Ranger T6, T7, T8, PX1, PX2, MK1, MK2 (XLT, Wildtrak trims)
Years: 2012-2021 (depending on version and market, to be checked before installation)
Material: OEM-style aluminum / ABS plastic adhesive version
Color: Black (depending on arrival: all black or silver and black)
Mounting: Screws into roof's original holes, without drilling / or adhesive bonding
Manufacturer reference: FR02
Position: Roof mounting
Dimensions: Original manufacturer dimensions
Contents: 1 set of roof bars with hardware
Maximum load: According to your vehicle's approved roof load
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours
