Ford Focus MK3 bonnet struts: the bonnet opens and stays in the air
This bonnet strut kit replaces the original metal prop rod on the Ford Focus MK3 from 2013 to 2017. Two gas-powered bonnet struts, their mounting brackets, their ball joints, and all the necessary hardware: the bonnet opens with one hand and stays open on its own, even in a crosswind.
Why switch to bonnet support struts
- Complete kit of 2 struts: the support struts work in pairs, one on the left and one on the right.
- Brackets and ball joints included: 2 long brackets, 2 short brackets, 4 screw-in ball joints, and all the hardware are included in the box.
- No more prop rod: no more rod to hook, no more bonnet falling back down while topping up oil.
- Assisted opening: the gas spring helps lift the bonnet and slows its descent, reducing strain on the sheet metal and hinges.
- Mounting on existing points: the brackets attach to the existing wing and hinge screws, without drilling.
Bonnet strut for Focus 3 saloon and estate
The restyled Focus MK3 retains the classic bonnet prop rod, which is inconvenient when working under the bonnet frequently: checking fluid levels, changing the battery, replacing the air filter, cleaning the engine. A bonnet strut kit solves the problem in one installation. It is also suitable for owners whose prop rod is bent or whose retaining hook has become loose. Remember to check that nothing obstructs the strut's travel if your vehicle is already fitted with a large performance air intake.
Technical specifications
Type: gas bonnet strut (bonnet support strut).
Quantity: 2 struts + 4 brackets + 4 ball joints + hardware.
Vehicle: Ford Focus MK3, 2013 to 2017.
Body: black-painted steel, chrome-plated rod.
Mounting: on existing screw points.
Position: front bonnet, on either side of the engine compartment.
Installation and maintenance
Allow 45 minutes for both sides. Open the bonnet and prop it up, position the long bracket on the hinge screw and the short bracket on the wing mounting point, screw in the ball joints, then clip the strut in with the rod pointing down. Tighten gradually and check that the bonnet closes without force before final tightening. Recheck the torque after 200 km. No maintenance required after that: do not grease the rod, as dust would stick to it. Check compatibility before installation according to the model — compare your mounting points with the photos.
Frequently asked questions
Do gas struts damage the bonnet hinges?
No, if they are installed on the designated points. They distribute the load and relieve the hinges, which no longer have to withstand the sudden impact of the bonnet falling back down.
Do you need to drill into the bodywork?
No. The brackets attach to existing hinge and wing screws; no drilling is required during installation.
Can you keep the original prop rod?
Yes, there is no need to remove it. It remains available as a backup if one of the struts weakens after several years.
Does the bonnet still close normally?
Yes. You simply need to assist the closing for the first few days until you get used to it: the strut slows the end of the travel.
Do they hold in extreme cold?
The pressure in a gas spring drops slightly below freezing. A new strut retains enough force to keep the bonnet open in winter.
No more searching for a prop rod: a bonnet that opens with one hand and stays in the air, all in just fifteen minutes of installation.
Type: gas bonnet strut
Quantity: 2 struts + brackets + ball joints
Vehicle: Ford Focus MK3 2013-2017
Finish: black, chrome-plated rod
Mounting: without drilling
Tools: socket wrench and flat-head screwdriver
Condition: 100% New
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours
