Porsche Macan (95B) Front Bumper Bracket 2015-2026, Left or Right
After a minor impact, a tight parking maneuver, or a loose bumper, the front bumper bracket is often the part that has failed. This mounting bracket fits the Porsche Macan (95B) and replaces the original part. It carries part numbers 95B805527 (left side) and 95B805528 (right side). Choose your side, then order. Installing a new bracket prevents gaps and noises between the bodywork and the bumper.
Why choose this item
- Original part numbers: 95B805527 for the left side, 95B805528 for the right side.
- Macan (95B) 2015-2026: Base, S, GTS and Turbo, according to the chart on the product page.
- Black metal part with mounting tabs and a screw stud, visible in the photos.
- Two sides to choose from: one part per order, to replace only the damaged side.
- Restores the original fit: body lines are aligned after installation.
- Simple replacement: no modifications to the vehicle.
What is this part used for?
The bracket is the crossmember that holds the edge of the front bumper against the wing. When it is bent or broken, the bumper becomes loose: the joints pull apart and vibrations become audible at constant speed. Replacing it restores the Macan's original line, prevents water and dust from entering, and protects the bumper itself. It is the typical part to replace after a minor collision, curb rubbing, or after removing the bumper for a repair.
Technical specifications
Left part number: 95B805527. Right part number: 95B805528. Vehicle: Porsche Macan, 95B chassis, 2015-2026. Position: front, bumper mounting. Finish: black. Sold: individually, side of your choice. Material: metal, according to the photos.
Compatibility: check before ordering
The product page displays a chart by version: Macan Base, Macan S, Macan GTS and Macan Turbo, with the corresponding years from 2015 to 2026. To be sure, check the part number of your old bracket (it is engraved or labeled) and compare it with 95B805527 or 95B805528. Pay attention to the side: left and right are determined sitting in the car, facing the road.
Installation
Installation requires removing the front bumper. Unscrew the fasteners from the old bracket, install the new one, tighten the stud, and remount the bumper while checking the alignment. If you are not used to it, entrust the part to a body shop: it is a quick job for a professional, with a cleaner result.
How to find my left or right side?
The left side is the driver's side on a left-hand drive car. The right side is the passenger side. Also check the part number on your old part.
Should I replace both brackets?
Not necessarily. If only one side is damaged, order that one. After a major impact, replacing both prevents a new gap.
Frequently asked questions
Is it an original part?
The product page uses the original Porsche part numbers 95B805527 and 95B805528. The manufacturer is not specified.
Is the part sold as a pair?
No, one side per order, according to your choice.
Do I need special tools?
Standard wrenches and sockets are sufficient. Removing the bumper requires patience.
Is it suitable for the Macan Turbo?
The chart on the product page lists Macan Base, S, GTS and Turbo.
Can I drive with a broken bracket?
It is better to replace it quickly: the bumper can move and become damaged.
Are the screws included?
The product page does not specify this. Reuse the original screws if they are in good condition.
Restore your Macan's original fit: choose your side and order.
Type: front bumper bracket
Vehicle: Porsche Macan (95B) 2015-2026
Part numbers: 95B805527 (left), 95B805528 (right)
Sold: individually, side of your choice
Condition: new
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours






















































































































































































