Mirror caps for MG4 EV Urban 2026-2027, black bull horn style
These mirror caps are designed for the MG4 EV Urban 2026-2027. They feature the so-called bull horn design: a raised point at the top of each mirror and a contour that extends down to the base. Sold as a pair (2 pieces), they fit over the original cap, giving it a more aggressive look in black without affecting the mechanics.
Why choose this item
- Bull horn design: a raised point on top of the mirror that changes the car's profile.
- Full coverage: the photos show the part as a cover that follows the original mold.
- Turn signal area preserved: the images indicate that the turn signal location remains clear.
- Adhesive mounting: the original listing states that it has an adhesive backing, with no need to remove the mirror.
- Subtle black: a shade that matches both light and dark bodywork.
- Pair supplied: two pieces, left side and right side, ready to install.
MG4 bull horn caps: who are they for, and what are they used for?
These MG4 Urban caps are for owners who want to personalize their electric city car without going to a body shop. On a light color, such as the lilac-grey in the photos, the black makes the mirrors stand out and creates a two-tone effect; on dark bodywork, the raised point is enough to change the silhouette. The part also protects the original cap from parking scratches and minor everyday bumps. It pairs well with other black accents, such as dark rims or window trim. For a consistent look, also check out our other MG4 accessories, such as the sun visors.
Technical specifications
Listed compatibility: MG4 EV Urban, 2026 and 2027 models. Material: ABS, according to the original description. Color: black. Quantity: 2 pieces (one pair). Mounting: adhesive backing shown in the photos. Exact dimensions are not provided: compare the contour with your mirror in the photos.
Compatibility: check before ordering
Listed model: MG4 EV Urban 2026-2027, as stated in the original listing's title. The original listing does not say whether these caps fit earlier MG4 versions or models with a camera or blind-spot detector in the mirror. The models, years, and references listed are those stated for this item: compare your mirror with the photos in the listing before ordering, and if in doubt, write to us with your exact model and a photo. Compatible depending on the model; check before installation.
Installation
Step 1: park the vehicle on level ground, unfold the mirrors, and degrease the original cap with isopropyl alcohol. Step 2: position the new cap without removing the backing film from the adhesive tape and check the fit around the contour. Step 3: mark the position with masking tape. Step 4: remove the film, replace the cap, and press firmly for one minute. Step 5: repeat on the other side. Allow the adhesive to set for 24 hours before washing. Allow 15 to 30 minutes for the pair, without any special tools, at a temperature above 15°C.
Choosing the right mirror caps
A mirror cap is highly exposed: parking scratches, sun, rain, salt. Check three points before buying. Mounting: over the original cap with double-sided tape, or as a replacement for the clipped cover. Finish: glossy black shows marks more quickly than a textured finish, but it can be polished. Fit: compare the contour with yours, as two adjacent mirrors (two versions of the same city car) may differ by a few millimeters. On an electric car, the mirrors also contribute to aerodynamics: a part that protrudes too far from the contour may whistle at high speeds. Always test the fit first, then take a short drive of a few kilometers after bonding to check for noise.
Frequently asked questions
Do these caps interfere with the mirror turn signal?
The images in the listing indicate that the turn signal location remains clear. Compare with your mirror before ordering.
Do you need to remove the mirror?
No, according to the listing: the part is stated to have an adhesive backing that sticks to the original cap.
Does the power folding still work?
The caps are lightweight and do not affect the mechanism. Check the folding after installation and before driving.
Can they be removed later?
Double-sided adhesive can be removed with gentle heat and fishing line, but it sometimes leaves a residue that needs cleaning. Have isopropyl alcohol on hand.
Give your MG4 Urban some character: order the pair of caps.
Type: mirror caps (pair)
Model: MG4 EV Urban 2026-2027
Material: ABS
Color: black
Mounting: adhesive backing
Quantity: 2 pieces
Condition: new
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours






















































































































































































