Genuine Carbon Fiber Mirror Caps for Toyota Corolla, GR Corolla, Yaris and GR Yaris
This pair of genuine carbon fiber mirror caps is listed for the 2020-2025 Toyota Corolla and GR Corolla, as well as the 2021-2025 Toyota Yaris and GR Yaris. They attach to the original mirror using adhesive: the product page states that installation does not damage the bodywork. The carbon weave is visible under a smooth clear coat, and the photos show the part with its dimensions, installation method, and views on the vehicle.
Why choose this item
- Genuine carbon fiber: visible weave under clear coat, listed as heat- and water-resistant.
- Four models to choose from: Corolla, GR Corolla, Yaris and GR Yaris.
- Adhesive installation: the product page states that installation does not require removing the mirror.
- Dimensions provided: approximately 28.8 cm for the pair and 14.1 cm for one part.
- Left- or right-hand drive: the product page states that they can be used in either case.
- New, complete pair.
What use are these mirror caps for
These caps are designed for Corolla, GR Corolla, Yaris or GR Yaris drivers who want carbon fiber mirrors without replacing the original part. Adhesive installation is quick and reversible under certain conditions: the original cap remains underneath and protected. Carbon fiber pairs very well with a GR Yaris or GR Corolla, but also with a standard Corolla or Yaris.
Technical specifications
Material: genuine carbon fiber.
Attachment: adhesive, no drilling required.
Contents: 2 parts (left and right).
Listed dimensions: approximately 28.8 cm (pair) and 14.1 cm (height of one part).
Models: Corolla and GR Corolla 2020-2025; Yaris and GR Yaris 2021-2025.
Driving side: left or right, according to the product page.
Compatibility: check before ordering
The model is selected from the variants menu: Corolla 2020-2025, GR Corolla 2020-2025, Yaris 2021-2025 or GR Yaris 2021-2025. The years listed are those stated on the product page. The four variants are sold at the same price: they probably correspond to the same part, but we cannot confirm this; check the shape of your mirror with the photos before ordering. The models and years listed are those stated for this item. The shape of the mirror changes depending on the generation, trim level, and equipment (camera, turn signal, blind-spot detector, power folding): compare your mirror with the photos on the product page before ordering, and if in doubt, write to us with your exact model, year, and a photo of your mirror. Compatible depending on the model; check before installation.
Installation
Step 1: park the vehicle in the shade, on level ground, and unfold the mirrors. Step 2: clean the original cap with isopropyl alcohol and let it dry completely; any trace of wax or grease will reduce the adhesive's hold. Step 3: position the part without removing the protective film, and mark the position with masking tape. Step 4: if the temperature is below 20°C, gently heat the adhesive backing with a hairdryer. Step 5: remove the film, position the part starting from the inner edge, then press firmly around the entire perimeter for one minute. Step 6: do not wash the vehicle for 24 hours. Allow 15 to 30 minutes for the pair.
Choosing the right carbon fiber mirror cap
A carbon fiber mirror cap is chosen based on four criteria. Exact compatibility first: the model, year, and equipment of the original mirror (camera, turn signal, blind-spot detector, power folding) determine the shape to purchase. Attachment method next: some parts stick onto the original cap, while others replace it entirely and require removal. Manufacturing also matters: genuine carbon fiber features a regular weave under clear coat, while a simple carbon-look film has no depth. Finally, look at the clear coat: a good glossy clear coat resists UV rays and washing. Always compare the photos on the product page with your mirror before ordering.
Frequently asked questions
Do the caps replace the original mirror?
No. According to the product page, they stick onto the original cap using adhesive, without removal or drilling.
Are they resistant to rain and sun?
The product page states that they are resistant to temperature and water. However, allow the adhesive 24 hours to cure before washing the vehicle.
Which model should I select?
Choose Corolla, GR Corolla, Yaris or GR Yaris from the menu, then compare the shape of your mirror with the photos.
Can I remove them later?
Removal is possible by heating the adhesive backing, but there is a risk of damaging the part. It is best to position it carefully during installation.
Order your mirror caps and give your vehicle a new look.
Brand: becquet-voiture.com
Reference: carbon fiber caps Toyota Corolla Yaris
Condition: new
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours
