Carbon fiber mirror caps: a cut specific to each Volkswagen model
These carbon fiber mirror caps are not a universal fit: each version features a cut specific to its model. A mirror cap is the removable outer cover of the mirror housing: it can be replaced to change the finish without affecting the mirror, defroster, or indicator repeater. Here, the carbon fiber weave is finished with a high-gloss clear coat and runs through the entire part rather than being printed on the surface.
Why choose these carbon fiber caps over a replica
- Genuine carbon fiber: the 2x2 twill weave is visible in relief beneath the clear coat, unlike an adhesive film or hydrographic print.
- Six distinct cuts: Scirocco, CC, Passat, Beetle, Golf 6, and Golf 7 MK7—each housing has its own shape.
- Models rarely covered: the Scirocco, CC, and Beetle are often overlooked by generic Golf kits.
- UV-resistant clear coat: the finish protects the resin from yellowing, a common defect in low-end carbon fiber parts.
- Identical mounting tabs: the cap clips onto the original mounting points without permanent adhesive or visible screws.
Carbon fiber mirror cap: how it changes your car
On a Scirocco or Passat, the mirror cap is one of the few visible surfaces at eye level. Switching to carbon fiber aligns the profile with dark wheels, a small spoiler lip, or a blacked-out grille without repainting the bodywork. It is also an elegant repair: a cap scratched by a door rub can be replaced individually. Choose your vehicle model from the list, as each part number has its own shape.
Technical specifications
Material: genuine carbon fiber with a clear coat.
Weave: glossy 2x2 twill.
Models: Scirocco, CC, Passat, Beetle, Golf 6, Golf 7 MK7.
Quantity: 2 pieces, left and right.
Mounting: clips onto the original mounting tabs.
Indicator cutout: retained.
Compatibility: by model and trim—check before installation.
Installation and maintenance
Fold the mirror in, unclip the original cap from the bottom using a plastic tool, then position the carbon fiber cap and press firmly until it clicks around the entire perimeter. Allow 15 minutes for the pair, with no need to remove the mirror or disconnect any wiring. Wash with soapy water and dry with a microfiber cloth. Applying a protective wax once or twice a year maintains the depth of the clear coat. Avoid abrasive polishes, which dull the weave.
Frequently asked questions
Which mirror cap is right for my car?
Select your model from the list: each housing has its own cut. Compare the shape of your original cap with the photos before ordering.
Is it real carbon fiber or an imitation?
It is a woven and clear-coated carbon fiber part with a pattern built into the material rather than applied to the surface.
How do I remove a mirror cap?
Slide a plastic tool under the lower edge and release the clips while working toward the front. No mirror removal is necessary.
Does the indicator repeater remain functional?
Yes. The original cutout is retained: the module stays in place and remains fully visible.
Does carbon fiber yellow in the sun?
The UV-resistant clear coat significantly delays this effect. Regularly applying a protective wax further helps preserve the color.
Genuine carbon fiber, a cut specific to each model, fifteen minutes to install: the finish your Volkswagen never had from the factory.
Type: carbon fiber mirror caps
Compatible brands: Volkswagen Scirocco, CC, Passat, Beetle, Golf 6, Golf 7
Material: genuine clear-coated carbon fiber
Quantity: 2 pieces
Mounting: clips
Installation: 15 minutes
Condition: 100% New
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours






















































































































































































