Bullhorn Mirror Caps for Volkswagen ID.3 2025-2027, Piano Black or Carbon Look
This set of bullhorn mirror caps for the Volkswagen ID.3 2025 to 2027 is made of ABS and is available in piano black or carbon fiber look. The "bullhorn" design extends the cap forward, with a point that gives the electric city car a more aggressive look. The product page states that they are self-adhesive, do not damage the original cap, and provide scratch protection.
Why choose this item
- Bullhorn design: a sporty profile when viewed from the front and side.
- High-quality ABS, scratch- and wear-resistant according to the product page.
- Two finishes: piano black or carbon look, each sold as a set of 2.
- Self-adhesive installation: no drilling required, and the original cap is not damaged.
- Mirror remains visible: the photos show that the field of vision is preserved.
- Before-and-after photos of the installation.
Who is it for, and what is it used for?
These ID.3 mirror caps are designed for owners who want to add character to their electric car without spending as much as they would on genuine carbon fiber parts. Piano black matches white, gray, or blue bodywork; the carbon look suits ID.3s already equipped with dark details. The adhesive installation is straightforward and does not leave a hole in the original cap.
Technical specifications
Listed model: Volkswagen ID.3, model years 2025 to 2027. Material: ABS plastic. Finishes: piano black or carbon look. Mounting: self-adhesive. Contents: 2 pieces. Exact weight and dimensions: not specified on the product page.
Compatibility: check before ordering
The product page lists only the 2025 to 2027 ID.3, meaning the updated generation. An older ID.3 has a different mirror: do not order for an older model without consulting us. Compare the shape of your mirror with the photos on the product page before purchasing. The models and years listed are those specified for this item. The mirror shape varies depending on the generation, trim, and equipment: compare your mirror with the photos on the product page before ordering, and if in doubt, write to us with your exact model, the year, and a photo of your mirror. Compatible depending on the model; check before installation.
Installation
Step 1: park the vehicle in the shade, on level ground, and unfold the mirrors. Step 2: clean the original cap with isopropyl alcohol and let it dry completely; any traces of wax or grease will reduce the adhesive's grip. Step 3: hold the piece against the mirror without removing the protective film, and mark the position with a piece of masking tape. Step 4: if the temperature is below 20°C, gently heat the adhesive backing with a hairdryer to improve adhesion. Step 5: remove the film, position the piece starting from the inner edge, then press firmly around the entire perimeter for one minute. Step 6: do not wash the vehicle for 24 hours. Allow 15 to 30 minutes for the pair. No drilling or cutting is required for this part.
Choosing the right mirror cap
A bullhorn cap changes the mirror's design: it should be assessed from the front and while driving. Before sticking it on, hold the piece in place and sit in the driving position to check that the field of vision is not reduced. Apply the adhesive in dry conditions, to a clean surface, and allow it to set for 24 hours. Piano black requires a soft cloth; the carbon look is more forgiving of marks. In both cases, avoid abrasive products.
Frequently asked questions
Is it suitable for the 2021 ID.3?
The product page lists 2025-2027. For an older ID.3, see our product page for carbon fiber caps for the Golf 8 and 2021 and newer ID.3s.
Which finish should I choose?
Piano black is smooth and solid; the carbon look features a visible weave when viewed up close. Both are made of ABS.
Does the part damage the original cap?
According to the product page, the self-adhesive installation does not damage the cap. Clean the surface thoroughly before installation.
Does the bullhorn obstruct rear visibility?
The photos on the product page show that the mirror remains visible. Check the position before permanently sticking it on.
Add character to your ID.3: choose your finish and order.
Type: bullhorn mirror caps (set of 2)
Listed model: Volkswagen ID.3 2025-2027
Material: ABS
Finishes: piano black, carbon look
Mounting: self-adhesive
Quantity: 2 pieces
Condition: new
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours






















































































































































































