Mirror caps for Dacia Duster, Bigster, Jogger and Sandero, gloss black or carbon look
This pair of ABS mirror caps is listed for the Dacia Duster 2018-2027, Bigster 2025-2027, Jogger 2022-2027 and Sandero 2022-2027. They fit over the original mirror cap and change the look of the mirror: two finishes to choose from, gloss black (piano black) or carbon fiber look. The product sheet specifies installation with adhesive tape, without cutting or drilling, and suitability for left- or right-hand drive.
Why choose this item
- Durable ABS material: it protects the original mirror from scratches and dirt.
- Two finishes: very smooth gloss black, or carbon look with a fine weave.
- Adhesive tape installation: no cutting or drilling required, according to the product sheet.
- Designed to fit the original: the cap follows the contour of the mirror and leaves the turn signal visible in the photos.
- Complete pair: one left cap and one right cap per order.
- New, ready to install.
What use are these Duster caps for?
These Duster mirror caps are for those who want to personalize their SUV without replacing the entire mirror. The gloss black gives a "black mirrors" effect that matches light shades, grey, or orange. The carbon look provides a more pronounced sporty look. They also protect the original cap from everyday minor scuffs. They are a good complement to black roof bars or dark rims.
Technical specifications
Models listed: Dacia Duster 2018-2027, Bigster 2025-2027, Jogger 2022-2027, Sandero 2022-2027. Material: ABS. Finishes: gloss black or carbon look. Mounting: adhesive tape. Quantity: 2 pieces (left and right). Version: left- and right-hand drive according to the sheet.
Compatibility: check before ordering
The sheet lists a very wide range of years (Duster from 2018 to 2027). The Duster changes shape between the second and third generations: the photos show a mirror from the recent generation, with the turn signal integrated into the cap. Compare the shape of your mirror with the photos before ordering. For an older Duster, see our other model of beak caps. The models and years listed are those announced for this item. The shape of the mirror changes depending on the generation, finish, and equipment: compare your mirror with the photos on the sheet before ordering, and if in doubt, write to us with your exact model, the year, and a photo of your mirror. Compatible depending on the model, to be checked before installation.
Installation
Step 1: park the vehicle in the shade, on level ground, and unfold the mirrors. Step 2: clean the original cap with isopropyl alcohol and let it dry completely; any trace of wax or grease reduces the adhesion of the adhesive. Step 3: position the part dry on the mirror, without removing the protective film, and mark the position with a piece of masking tape. Step 4: if the temperature is below 20°C, gently heat the adhesive backing with a hairdryer to improve adhesion. Step 5: remove the film, place the part starting from the inner edge, then press firmly around the entire perimeter for one minute. Step 6: do not wash the vehicle for 24 hours. Allow 15 to 30 minutes for the pair. No drilling or cutting is listed for this part.
Choosing a mirror cap correctly
A mirror cap is chosen first by shape, then by finish. Photograph your mirror from the front and compare it with the images on the sheet: the contour, the position of the turn signal, and the bottom edge must be the same. For adhesive installation, opt for a dry and mild day, between 15 and 25°C, and a well-degreased surface. Gloss black shows micro-scratches more than a matte finish: a microfiber cloth and a mild shampoo are enough to maintain it. The carbon look hides fingerprints better.
Frequently asked questions
Are these caps suitable for my 2018 Duster?
The sheet lists the Duster 2018-2027, but the shape of the mirrors changed with the recent generation. Compare your mirror with the photos or send us a photo before ordering.
Do I need to remove the mirror?
No, according to the sheet: the part is glued onto the original cap with the adhesive tape.
What is the difference between gloss black and carbon look?
Gloss black is smooth and solid. The carbon look features a woven texture visible up close. Both are made of ABS.
Personalize your Duster in a few minutes: choose your finish and order.
Type: mirror caps (pair)
Models listed: Dacia Duster, Bigster, Jogger, Sandero
Material: ABS
Finishes: gloss black, carbon look
Mounting: adhesive tape
Quantity: 2 pieces
Condition: new
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours






















































































































































































