VW T-Cross 2019-2023 glossy black beak-style mirror caps, part numbers 2GG857537 and 2GG857538
This pair of mirror caps for the 2019-2023 VW T-Cross gives the mirrors a sporty beak shape in a deep glossy black. The caps match housing part numbers 2GG857537 (left) and 2GG857538 (right). They fit over the original cap using the supplied double-sided adhesive, with no drilling required. The look is instantly transformed, and the original cap is protected from scratches.
Why choose this product
- Glossy black beak style for a sporty look.
- Housing part numbers 2GG857537 and 2GG857538.
- ABS resistant to corrosion and wear.
- Double-sided adhesive and preparation wipes included.
- Protects the original cap.
- Pair for the left and right sides.
T-Cross mirror caps: who are they for and what are they used for?
These VW T-Cross mirror caps are designed for drivers who want a bolder style, inspired by R-Line trim, or who wish to match the mirrors to a black roof and dark wheels. The glossy black finish complements all body colours. They are also practical for concealing a scratched original cap without repainting. Installation takes just a few minutes.
Technical specifications
Type: mirror cap covers, beak style. Material: high-quality ABS plastic. Finish: glossy black. Mounting: double-sided adhesive. Quantity: 2 pieces (left and right). Housing part numbers: 2GG857537 and 2GG857538. Vehicle: 2019-2023 VW T-Cross. Compatible mirror: version with a turn signal repeater below the housing, as shown in the photos.
Compatibility: check before ordering
Listed vehicle: 2019-2023 VW T-Cross. The listing also mentions Tiguan, Tharu, Tayron and Jetta models from 2019 to 2023 sold outside Europe: only mirrors with an original cap bearing part number 2GG857537 / 2GG857538 are affected. The "Fit" and "Not Fit" photos show the compatible housing and the incompatible one: compare them with your mirror. The mirror housing may vary depending on the model year and equipment: compare your mirror with the photos before ordering, and if in doubt, send us your model, the year and a photo. Compatible depending on the model; check before installation.
Installation
Step 1: park the vehicle in a sheltered area at a temperature of at least 15°C. Step 2: wash the original cap, degrease it with isopropyl alcohol and allow it to dry. Step 3: hold each cap up to the light to determine its exact position on the left and right sides. Step 4: remove the film from the double-sided adhesive, position the cap and press firmly over the entire surface for 30 seconds. Step 5: wait 24 hours before washing. Allow 15 to 30 minutes for the pair, with no special tools required. A light blast with a hairdryer on the adhesive improves adhesion in cool weather.
Choosing the right mirror cap
First, choose the exact generation: the housing shape and the position of the turn signal or camera vary from one model to another. A cover cap sticks onto the original cap; a replacement cap clips into place. In terms of finish, glossy black is sporty and subtle, carbon effect is more racing-inspired, and chrome is more elegant.
Frequently asked questions
How do I check compatibility?
Compare your mirror with the "Fit" and "Not Fit" photos on the listing, or check the part number on the back of the original cap: it must be 2GG857537 (left) or 2GG857538 (right).
Do I need to drill or remove the mirror?
No. Installation requires no drilling: the cap sticks onto the original cap using the double-sided adhesive. All that is needed is a clean, degreased surface.
Will the turn signal remain visible?
Yes. The cap covers the top and back of the housing; the turn signal repeater located underneath remains exposed.
Can it be removed later?
Yes. Gently heat the adhesive with a hairdryer, slide a nylon thread behind the cap to loosen it, then remove any residue with a suitable product. The original cap underneath remains undamaged.
Can the cap be washed?
Yes, once installed, it can be washed normally. Avoid using a high-pressure jet too close to the edges for the first few days.
Give your T-Cross a sporty look: order the pair of beak-style caps.
Type: beak-style mirror caps
Vehicle: VW T-Cross (2019-2023)
Part numbers: 2GG857537, 2GG857538
Material: ABS
Finish: glossy black
Mounting: double-sided adhesive
Quantity: 2 pieces
Condition: new
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours
