RGBIC underbody LED ambient lighting: the light that redefines your car when parked
A car resting on a halo of color no longer looks like the same car. This RGBIC LED ambient lighting kit places six strips under the vehicle and projects a carpet of light on the ground that highlights the wheel arches, the lower body line, and the stance. Unlike monochrome strips that flood everything with a single shade, RGBIC technology controls the LEDs in segments: colors flow, ripple, and scroll along the strip instead of changing as a single block.
Six 5050 SMD strips, two lengths, full underbody coverage
The kit does not stop at two symbolic sections. It includes four 60-centimeter strips and two 150-centimeter strips, providing enough length to cover both sides of the vehicle along their entire length and both ends. This layout avoids dark areas between the wheels, a classic flaw of four-short-strip kits.
The chips are 5050 SMD LEDs, a proven format for light density. The manufacturer claims a lifespan of 50,000 hours—which is far beyond the vehicle's ownership period with occasional use at car meets and photo shoots.
IP68 waterproofing, 200 modes, and app control: the electronics of this RGBIC kit
Under a car, light takes the brunt of rain, road salt, and gravel spray. The kit is rated with IP68 waterproofing, the expected level for underbody installation, and operates at 12 V on the onboard electrical system. The controller can be operated from either a mobile app or the included remote control: over 200 pre-programmed modes are claimed, from slow gradients to fast scrolling, with optional music synchronization.
The installation remains reversible. The strips are attached under the chassis rails and behind the bumpers, the controller is housed in the engine compartment or cabin, and the whole system is powered by a fuse-protected line. A properly wired underbody LED kit can be removed in an hour when it comes time to sell the car.
- Segmented RGBIC LED lighting—multiple simultaneous colors and scrolling effects, not just plain RGB
- 6 strips included—4 x 60 cm and 2 x 150 cm, full underbody coverage
- Claimed IP68 waterproofing—designed for rain, spray, and washing
- Over 200 lighting modes—gradients, chasing, music synchronization
- Dual control—mobile app and remote control included
- 5050 SMD chips, claimed 50,000-hour lifespan—high light density and longevity
Installing the strips under your car without drilling into the bodywork
Work on a cold vehicle, on flat ground, ideally on ramps or jack stands to comfortably access the underbody. Carefully degrease the mounting surfaces, position the strips along the chassis rails while protecting them from any hot spots, especially the exhaust line, and then supplement the adhesive mounting with cable ties: this is the only way to achieve a lasting hold. The controller is then connected to the 12 V system via a dedicated fuse. Installing an underbody LED kit requires method more than tools; allow two to three hours for a clean and protected routing.
Can you drive with underbody lighting?
This is the first question asked about this type of kit, and the answer deserves to be clear: vehicle lighting is strictly regulated, and unapproved additional lighting has no place on public roads while driving. This kit is therefore intended for stationary use—car meets, exhibitions, photo shoots, closed circuits, and garages. Check the regulations in force in your country before use, and plan for a switch that completely cuts the underbody LED neon when you get back on the road.
Light as a styling element, at Becquet Voiture
Interior strips, fiber optics, backlit sills, underbody: we treat lighting as a bodywork component, because it changes the perception of a car as radically as a new set of wheels. We favor kits whose waterproofing rating, strip length, and control method are actually specified. A question about wiring or the length suitable for your vehicle? Our French team will answer you.
Place your car on a halo of color: order your six-strip RGBIC kit.
Type: Underbody LED ambient lighting kit
Compatible brand / model: Universal, 12 V vehicles
Years: Depending on version
LED technology: Addressable multicolor RGBIC
Chips: 5050 SMD
Number of strips: 6
Lengths: 4 x 60 cm and 2 x 150 cm
Voltage: 12 V
Waterproofing: Claimed IP68
Lighting modes: Over 200
Control: Mobile app and remote control
Claimed lifespan: 50,000 hours
Mounting: Adhesive and cable ties recommended
Use: For stationary use only—driving lighting is regulated
Condition: 100% new
Main function: Create a colored light halo under the vehicle
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours






















































































































































































