Acrylic LED ambient lighting kit: completely transform your cabin at night
Some interiors are content with a yellowish overhead light. Others, once night falls, resemble the interior of a large German touring car. This acrylic LED ambient lighting kit belongs to the latter category: up to eighteen coordinated light points, dashboard strips, footwell lights, door pockets and door storage compartments, all controlled by a single unit. You wanted a proper, continuous car interior lighting system, not four hastily glued strips? That is exactly what this kit offers.
Acrylic strips that create a perfectly uniform line of light
At the heart of the kit are the acrylic rods: 90 cm, 75 cm and 25 cm depending on the configuration, flexible enough to follow the curve of a dashboard or door panel, yet rigid enough to hold their shape without sagging. Light is injected at one end and spreads through the material: no individual LEDs are visible, only a continuous line that follows the contours of the trim exactly. It is this detail that separates a cheap interior car LED strip from a finish that looks like it came from the factory.
These rods are complemented by four footwell lights, four door pocket lights and four storage compartment lights, each on its own cable. You therefore get several layers of light: the upper line on the dashboard, the lower wash at leg level, and the accent lights in the storage compartments. A car footwell light alone never provides this depth.
Symphony or RGB: two ways to bring color to life in the cabin
The standard RGB version displays a single color at a time along its entire length, with smooth transitions from one shade to another. The Symphony Rainbow version controls the LEDs individually: several colors coexist on a single rod and move in waves, creating the fluid gradient effect seen in show car builds. The music mode makes the most of this second version: the unit's microphone picks up the music and moves the colors to the beat of the bass.
The entire system is controlled via Bluetooth from an app: 64 preset scenarios, brightness adjustment, animation speed selection, and scheduled shut-off. One master controller manages up to four slave controllers depending on the chosen configuration, avoiding the common pitfall of multi-zone kits: zones that do not start together.
- 6, 10, 14 or 18-in-1 configurations — from a simple dashboard outline to a fully treated interior
- Acrylic rods with continuous light — no visible LEDs, a clean line that follows the contours of the trim
- Addressable Symphony version — multiple simultaneous colors and fluid waves on a single rod
- Bluetooth app and music mode — 64 scenarios, fine adjustment, reaction to the car stereo sound
- Footwell and door pocket lights included — several layers of light, not just a single strip
- Installation accessories provided — spatula, adhesives, extension cables and power cable with switch
Installing this ambient kit in your car: prepare before gluing
Success depends entirely on preparation. First, hold all the rods up to the trim to check the lengths and cable exit points, carefully degrease the surfaces, and then insert the rods into the trim gaps using the provided spatula rather than gluing them flat. The cables then run under the mats and behind the sills to the controller. Installing a complete ambient lighting system takes half a day the first time: do not start it the day before you leave.
The kit is universal and runs on 12 V; it fits most sedans, compact cars, estates and SUVs. As the rod lengths are fixed, measure the width of your dashboard before choosing your configuration, and check whether your version has access to permanent or ignition-switched power.
Should you really choose the 18-in-1 configuration?
It all depends on the scope of the project. The 6-in-1 configuration treats the dashboard line and the front footwells: that is already a visible transformation. The 10-in-1 adds the front doors. The 14-in-1 extends the effect to the rear seats. The 18-in-1 treats the entire cabin, including storage compartments, and is the only one that gives this impression of high-end factory lighting, without dark areas between two light sources. If your car is a five-door model used by the family, the 18-in-1 version is the one that makes the most impression, even from the rear seats.
Interior ambiance, a house specialty at Becquet Voiture
We see many lighting kits pass through our hands, and we reject those whose rods yellow, whose controllers lose their pairing, or whose cables are too short to be routed neatly. What we keep are complete sets, delivered with the installation accessories, capable of withstanding several summers behind a dashboard exposed to the sun. Our French team will guide you toward the configuration suited to your vehicle.
Choose your configuration and transform every night drive into an onboard experience.
Type: Acrylic rod interior LED ambient lighting kit
Compatible make / model: Universal, 12 V vehicles
Years: Depending on version
Configurations: 6-in-1, 10-in-1, 14-in-1, 18-in-1
LED types: Standard RGB or Symphony Rainbow (addressable)
Voltage: 12 V
Control: Bluetooth via app, 64 scenarios, music mode
Rod lengths: 90 cm, 75 cm and 25 cm depending on configuration
Included elements: Acrylic rods, footwell lights (x4), door pocket lights (x4), storage compartment lights (x4)
Controllers: 1 master controller + up to 4 slave controllers depending on configuration
Wiring: Power cable with switch (102.5 cm), 132 cm and 61 cm extension cables, 47 cm auxiliary cables
Installation accessories: Spatula, double-sided adhesive, instructions
Box dimensions: 22.8 x 22 x 5.5 cm
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours






















































































































































































