Ford Ranger 2017-2020 Front Headlights: Pair, Left and Right, H4 Base
This pair of front headlights for the 2017-2020 Ford Ranger retains the pickup's original design: black housing, orange turn signal, and tiered reflector. The listing states a plug-and-play installation, an H4 base, and a pair left and right in the same order. The photos show the housing from several angles, with the connectors and sockets to compare with yours.
Why choose this item
- Left and right pair: both housings are supplied together.
- Design close to original: black housing and orange turn signal, for a front end without a break in style.
- H4 base stated: the bulb type is specified on the listing.
- Plug-and-play installation stated, with reverse polarity protection according to the listing.
- Water resistance and shock resistance stated for off-road use.
- Detailed photos of the sockets, connectors, and the back of the housing.
For what use?
These headlights are suitable for a 2017-2020 Ford Ranger whose housings are cracked, yellowed, fogged, or damaged by a shock. Their design close to the original allows you to change both sides at once and regain a clean front end, without changing the style of the pickup. The listing states brighter lighting than worn bulbs: it is mainly the new and clear lens that improves visibility. Use the lighting in compliance with local regulations.
Technical specifications
Type: pair of front headlights, left and right. Bulb base: H4. Voltage: 12 V. Years stated: 2017 to 2020. Model stated: Ford Ranger. Stated weight: approximately 15 kg per package. Installation: replacement of the original housing, of a plug-and-play type according to the listing.
Compatibility: check before ordering
This pair is stated for the 2017-2020 Ford Ranger. The listing also cites the 2015-2021 range for the Ranger family; exact compatibility depends on your trim and the type of original optic. Compare the photos of the connectors with those of your vehicle and, if in doubt, send us a photo of your current headlights and their connector. Headlights vary by generation, trim, and original equipment: compare your current headlights with the photos on the listing before ordering, and if in doubt, contact us with your exact model, year, and a photo. Compatible by model, to be checked before installation.
Installation
Step 1: park the vehicle on flat ground, turn off the ignition, and disconnect the battery. Step 2: remove the elements that cover the housing (grille, wheel arch, or bumper depending on the model) following the workshop manual. Step 3: loosen the fasteners and disconnect the connectors of the old headlight, without pulling on the wires. Step 4: compare the connectors and mounting points of the new housing with those of the old one: they must be identical. Step 5: install the new headlight, reconnect it, reassemble the removed elements, then reconnect the battery. Step 6: test the low beams, high beams, daytime running lights, and turn signals, then have the beam height adjusted. Allow 1 to 3 hours per side depending on the vehicle. If you are not comfortable with this type of disassembly, entrust the installation to a professional.
Headlights: points to check before buying
A front headlight is not just an aesthetic part: it determines what you see at night and how others see you. Before ordering, check three points. First the side: left and right are not interchangeable, the left side is the driver's side on a left-hand drive vehicle. Next the original technology of your vehicle (halogen, xenon, or LED), because it determines the connector and sometimes the control unit involved. Finally the beam height adjustment: after installation, have the headlight alignment checked so as not to blind other drivers. Always use the lighting in compliance with local regulations. Also take a photo of your current headlights, turned on, and compare it to the images on the listing: this is the most reliable method to confirm compatibility before purchase.
Frequently asked questions
What does the order contain?
A pair: one left headlight and one right headlight.
Do the headlights need to be adjusted after installation?
Yes. After each headlight replacement, the height and orientation of the beam must be adjusted for your Ford Ranger. It is a safety point as much as comfort.
What if my connector is different?
Never force a connection. Write to us with a photo of your connectors and your original headlight, we will check with you before shipping.
Bring clarity back to the front end of your Ranger: order your pair of headlights.
Type: Pair of front headlights
Compatible Brand / Model: Ford Ranger (2017-2020)
Base: H4
Position: Front, left and right
Voltage: 12 V
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours
