4-inch LED work lights — see wide and far at the same time
These 4-inch LED work lights come in a set of 2 and combine a long-range beam and a wide beam in a single housing. That's exactly what you want for a 4x4, pickup truck, ATV, or boat: to illuminate the track ahead without losing sight of the roadside. Four colors are available, including amber, which cuts through dust and fog.
Why choose these off-road LED lights
- Combined beam: half of the diodes produce a narrow beam for distance, while the other half produce a wide floodlight for peripheral visibility.
- 4-inch size: compact enough to fit on a bull bar, roof rack, or roll bar.
- Four colors: white for clarity, amber and yellow for dust and rain, and white and yellow to switch between them depending on conditions.
- Sealed housing: designed for off-roading, water spray, and wading.
- Adjustable mount: the bracket allows you to aim the beam toward the ground or the horizon.
- Low power consumption: LED technology draws significantly less power than a halogen light of the same brightness.
Pickup truck, ATV, boat, farm equipment: where to mount them
A 12V LED work light isn't just for racing. On a 4x4 or SUV, a pair mounted on the roof rack illuminates the track during off-road use. On a pickup truck, two units facing rearward turn the truck bed into a nighttime work area. On an ATV or UTV, they supplement often-insufficient factory lighting. On a boat or tractor, they serve as a fixed-position work light. For use outside public roads: check local regulations before driving with them on open roads.
Technical specifications
Type: LED work lights with combined beam. Diameter: 4 inches. Quantity: 2 pieces. Colors: white, amber, yellow, white and yellow. Sealed housing with impact-resistant lens. Adjustable mounting bracket included. Uses: 4x4, pickup truck, ATV, UTV, boat, farm equipment. Condition: 100% new.
Installation and maintenance
Secure each housing by its bracket to a rigid mount: bull bar, roof rack, roll bar, or roof bar. Draw power from the battery through a relay and a suitable fuse, then control the set with a switch in the cab. At night, adjust the tilt facing a wall to avoid glare. Allow 1 to 1.5 hours to properly wire a pair. Maintenance: rinse the lens after a muddy outing without using a scraper.
Frequently asked questions
What is the difference between a narrow beam and a wide beam?
The narrow beam concentrates light far ahead, while the wide beam illuminates close by and to the sides. These lights do both at the same time, so you don't have to buy two different models.
Why choose amber?
Because amber light reflects much less off airborne particles. In dust, snow, or fog, you can see terrain features more clearly than with pure white.
Can they be used on open roads?
These are work lights intended for use outside public roads. Their use on public roads is regulated: check your local regulations before turning them on while driving.
Do I need a relay to connect them?
Yes, it is highly recommended: the relay prevents current from passing through a small dashboard switch and helps reduce voltage drops.
Can they withstand rain and washing?
The housing is sealed against spray and designed for off-road use. Avoid using a high-pressure washer at close range on the lens seal.
Illuminate your nighttime outings as if it were broad daylight: one pair, one relay, one switch, and the track opens up before you.
Type: LED work lights with combined beam
Diameter: 4 inches
Quantity: 2 pieces
Colors: White, amber, yellow, white and yellow
Sealing: Sealed housing for off-road use
Mounting: Adjustable bracket included
Uses: 4x4, pickup truck, ATV, UTV, boat, farm equipment
Condition: 100% New
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours
