Ford Ranger T7 2016-2021 LED Headlights: Pair of Front Headlights with LED Projectors and Daytime Running Lights
This pair of LED headlights for the 2016-2021 Ford Ranger T7 replaces the original units with LED projector modules and a daytime running light signature. The listing also mentions the 2016-2020 Ford Everest. The images show the daytime running lights, turn signals, low and high beams, as well as the two complete units, left and right.
Why choose this product
- Left and right pair included in the same order.
- Lens LED projectors: low and high beams shown on the listing.
- Daytime running light signature with turn signals for a more modern look.
- Ranger 2016-2021 and Everest 2016-2020: models shown in the listing images.
- Complete assembled unit, with connectors visible in the rear photos.
- Photos of installation on real vehicles, in red and black, to assess the look.
What is it used for?
These headlights are designed for Ford Ranger T7 (or Everest) owners who want to modernize the front end or replace damaged units. The all-LED style gives the pickup a more striking presence, day or night, with a sharper beam than aging halogen optics. Use the lighting in compliance with local regulations, and have the beam height adjusted after installation.
Technical specifications
Type: pair of complete front headlights, left and right. Technology: LED, lens projector. Voltage: 12 V. Listed years: Ranger 2016-2021, Everest 2016-2020. Illustrated functions: daytime running lights, turn signals, low beam, high beam. Position: front. Installation: replacement of the original unit; check the connectors before installation.
Compatibility: check before ordering
This pair is listed for the 2016-2021 Ford Ranger T7 and the 2016-2020 Ford Everest. The listing asks you to check that the connectors are identical to those on your vehicle: the original headlight may be halogen or LED depending on the trim level. Look at the back of your current headlights and compare them with the photos before ordering. Headlights vary by generation, trim level, and original equipment: compare your current headlights with the photos on the listing before ordering, and if in doubt, contact us with your exact model, year, and a photo. Compatible depending on the model; check before installation.
Installation
Step 1: park the vehicle on level ground, turn off the ignition, and disconnect the battery. Step 2: remove the components that cover the headlight unit (grille, wheel arch, or bumper depending on the model) by following the workshop manual. Step 3: loosen the fasteners and disconnect the connectors from the old headlight without pulling on the wires. Step 4: compare the connectors and mounting points of the new unit with those of the old one: they must be identical. Step 5: install the new headlight, reconnect it, reassemble the removed components, and then reconnect the battery. Step 6: test the low beams, high beams, daytime running lights, and turn signals, then have the beam height adjusted. Allow 1 to 3 hours per side depending on the vehicle. If you are not comfortable with this type of disassembly, entrust the installation to a professional.
Headlights: points to check before buying
A front headlight is not just an aesthetic part: it determines what you see at night and how others see you. Before ordering, check three points. First, the side: left and right are not interchangeable; the left side is the driver's side on a left-hand drive vehicle. Next, the original technology of your vehicle (halogen, xenon, or LED), as it determines the connector and sometimes the control unit involved. Finally, the beam height adjustment: after installation, have the headlight alignment checked so as not to blind other drivers. Always use the lighting in compliance with local regulations. Also take a photo of your current headlights when they are on and compare it with the images on the listing: this is the most reliable method to confirm compatibility before purchase.
Frequently asked questions
What does the order contain?
A pair: one left headlight and one right headlight.
Do the headlights need to be adjusted after installation?
Yes. After each headlight replacement, the height and orientation of the beam for your Ford Ranger must be adjusted. This is a matter of safety as well as comfort.
What should I do if my connector is different?
Never force a connection. Write to us with a photo of your connectors and your original headlight; we will check with you before shipping.
Give your Ranger T7 a more striking presence: order your pair of LED headlights.
Type: Pair of LED front headlights
Compatible make / model: Ford Ranger T7 (2016-2021), Ford Everest (2016-2020)
Technology: LED, projector lens
Position: Front, left and right
Voltage: 12 V
Condition: new
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours






















































































































































































