Ford Ranger T7 T8 2015-2021 Wheel Arch Extensions LED 6-Piece Set

Ford Ranger T7 and T8 Fender Flares: the Wildtrak look with LED repeaters

These fender flares for Ford Ranger dress the pickup's four wheel arches and add the visual width sought after fitting off-road tires. The complete 6-piece set covers the T7 and T8 generations, model years 2015 to 2021, and incorporates amber LED repeaters that give the vehicle a special edition appearance.

Why this fender extension kit instead of a universal profile

• 6-piece set: four complete arches and two front connection pieces, designed to fit the Ranger's bodywork without gaps or unevenness.
• Integrated amber LED repeaters: the side lighting signature of high-end trims, on an XL or XLT Ranger that does not have them originally.
• UV-treated ABS: the ABS plastic withstands gravel, salt, and high-pressure washing without fading or cracking.
• Covers widened wheels: a fender extension brings the tread under the bodywork guard and limits spray on the doors.
• Mounting on existing points: the installation relies on the original clip holes, supplemented by provided fasteners.

Ford Ranger T7, T8 and Wildtrak Fender Flare

The Ranger T7 (2015-2018) and the Ranger T8 (2019-2021) share the same double cab body and wheel arch design, allowing this set to cover both. On a plain XL or XLT trim, the effect is immediate: the pickup takes on the stance of a Wildtrak. On an already lifted vehicle, the fender flare restores the correct proportion between the wheel and the bodywork. If you have fitted wider tires, it is also the piece that brings the whole thing back into a visually coherent geometry.

Technical specifications

Type: fender flare set for pickup. Contents: 6 pieces plus screws and fasteners. Material: ABS treated against UV. Finish: textured matte black. Lighting: integrated amber LED repeaters, 12 V power supply. Stated compatibility: Ford Ranger T7 and T8, 2015 to 2021, double cab, to be checked before installation according to the trim. Installation type: mounting on existing clip points, localized drilling possible depending on the version. Condition: 100% New.

Installation and maintenance

Allow for a half-day for two. Clean and degrease each wheel arch, dry fit the flare to check the alignment, then fix it from front to back, leaving the fasteners slightly loose until the last point. The repeaters' wiring goes up towards the parking light power supply, protected by cable grommets in the sheet metal penetrations. A sealing cord on the edge prevents infiltration and rubbing. Maintenance: regular rinsing to prevent sand from working its way between the fender and the extension.

Frequently asked questions

How to fit fender flares on a Ranger?
On the original clip points, after dry fitting. The provided fasteners complete the fixation, and the final tightening is done once the alignment is validated.

Are the fender flares approved?
A track or bodywork widening must remain covered by the vehicle's approval. Check with your technical inspection center before driving.

Is this kit suitable for a Ranger Raptor?
The Raptor has factory-widened fenders, with a different geometry. This set is aimed at standard T7 and T8 models; compare your wheel arches to the photos.

Do you need to drill the bodywork?
The installation prioritizes existing holes. Depending on the trim, localized drilling may be necessary: do a dry fit before any cutting.

Are the LED repeaters mandatory to connect?
No, the flare can also be fitted without connection. When connected, the repeaters light up with the parking lights.

Give your Ranger the stance of a high-end trim: a 6-piece fender flare set, including LED repeaters, fitted in half a day.

Type: Fender flare set with LED repeaters
Compatible brand / model: Ford Ranger T7 and T8 double cab
Years: 2015 to 2021
Contents: 6 pieces, screws and fasteners
Material: UV-treated ABS
Finish: Textured matte black
Lighting: 12 V amber LED repeaters
Condition: 100% New