Collection · 4 products
Peugeot LED Turn Signals
Peugeot LED turn signals for 508, 205, 3008, 5008. Dynamic LED repeater. Easy installation, premium finish. Free shipping.
- Ships in 48 hours
- 2-year legal warranty
- Free fitment advice
Peugeot LED Turn Signals: Dynamic Repeaters
The dynamic LED turn signal — the one that sweeps from the inside out — has become one of the hallmarks of modern vehicles. This collection brings together repeaters and LED turn signals designed for the Peugeot 508, Peugeot 205, Peugeot 3008, and Peugeot 5008, replacing the original orange units.
The sequential sweeping is managed by electronics built into the unit: nothing to program, the timing is factory-calibrated. The amber tint complies with the requirements for a turn signal, and the smoked housing conceals the unlit diodes for a clean look during the day.
Installation uses the original connectors on most models: remove the fender repeater or mirror cap, unplug, reconnect, and snap back into place. Allow ten to twenty minutes per side, without removing the bumper on most models.
Two points to check before ordering. First, the generation: a Peugeot 508 has a different unit from one phase to the next. Next, the mounting method: fender repeater, mirror-integrated lens, or complete unit — the product page always specifies this.
If the turn signal flashes too quickly after installation, it's the classic hyper-flash issue: the flasher unit detects a lower power draw than with incandescent bulbs. A ballast resistor or a LED-compatible flasher unit solves the problem; our guide details both solutions.
Compatible with the entire Peugeot range
The Peugeot models actually represented in this collection are: 508, 205, 3008, and 5008. Each product page specifies the generation, phase, and years concerned: compare them with your registration certificate before ordering, as the same model name often covers two different body styles.
Compatible models: 106, 205, 206, 207, 208, 301, 307, 308, 407, 508, 2008, 3008, 5008, RCZ, Partner, Rifter, Expert, and Traveller.
Why choose this collection?
- Sequential sweeping: dynamic sweep managed by the built-in electronics.
- Original connection: uses the manufacturer's connectors, with no wiring harness cutting on most models.
- Clean look during the day: smoked housing that conceals the unlit diodes.
- Amber tint: the expected color for a turn signal.
Frequently asked questions
Are LED turn signals allowed in France? A turn signal must be amber and comply with approval specifications. Check the marking on the product page; our guide summarizes the regulations.
Why does my turn signal flash faster after installation? It's hyper-flash: the flasher unit interprets the low power draw of the LEDs as a blown bulb. A ballast resistor or a LED-compatible flasher unit corrects the issue.
Does installation require removing the bumper? Rarely. Fender repeaters can be unclipped from the outside, and mirror lenses can be reached after removing the cap. Allow ten to twenty minutes per side.
Popular searches: peugeot 508 led turn signal • 3008 led turn signal • led turn signal • car led turn signal • peugeot led turn signal • peugeot 205 led turn signal • peugeot 3008 led turn signal • peugeot 5008 led turn signal.
