Carbon-look mirror caps for 2017-2021 Toyota C-HR and 2014-2018 Corolla, for mirrors with turn signal repeaters
This pair of carbon-look mirror caps for 2017-2021 Toyota C-HR and 2014-2018 Toyota Corolla gives the exterior mirrors a sporty look, with the woven carbon pattern under a glossy clear coat. They are designed for mirrors equipped with an integrated turn signal repeater: the cutout leaves the turn signal visible. The caps fit over the original cap thanks to the pre-applied 3M adhesive on the back, with no drilling required. In addition to the style, they protect the original cap from scratches caused by keys, fingernails, or hedges.
Why choose this item
- Carbon-look with a glossy finish for a sporty look.
- Pair of left and right caps.
- Pre-applied 3M automotive adhesive.
- Cutout designed for the turn signal repeater.
- High-quality ABS plastic, lightweight and rigid.
- Covers existing scratches on the original cap.
C-HR and Corolla mirror caps: who are they for, and what are they used for?
These Toyota C-HR and Corolla mirror caps are ideal for drivers who want to personalize their car without going through a body shop. The carbon look matches a spoiler, lip, or diffuser in the same style, and makes a C-HR or Corolla look more dynamic in just fifteen minutes. They are also an affordable solution for hiding a scratched mirror cap: rather than repainting or replacing the cap, you simply cover it. Installation requires no special tools.
Technical specifications
Type: mirror cover caps. Material: high-quality ABS plastic, with a black carbon-look finish. Mounting: pre-applied 3M automotive adhesive on the back. Quantity: 2 pieces (left and right). Compatible mirror: with integrated turn signal repeater. Vehicles: 2017-2021 Toyota C-HR and 2014-2018 Toyota Corolla (non-North American versions).
Compatibility: check before ordering
Listed vehicles: 2017-2021 Toyota C-HR and 2014-2018 Toyota Corolla. The caps are designed only for mirrors with an integrated turn signal; mirrors without a turn signal are not compatible. Corollas sold in North America have a different mirror and are excluded. The mirror housing may vary depending on the model year and equipment: compare your mirror with the photos before ordering, and if in doubt, send us your model, year, and a photo. Compatible depending on the model; check before installation.
Installation
Step 1: park the vehicle in a sheltered area at a temperature of at least 15°C. Step 2: wash the original cap, degrease it with isopropyl alcohol, and let it dry. Step 3: hold each cap up to the mirror to determine its exact position on the left and right sides. Step 4: remove the film from the double-sided adhesive, position the cap, and press firmly over the entire surface for 30 seconds. Step 5: wait 24 hours before washing. Allow 15 to 30 minutes for the pair, with no special tools required. A light blast with a hairdryer on the adhesive improves adhesion in cool weather.
Choosing the right mirror cap
First, choose the exact generation: the shape of the housing and the position of the turn signal or camera vary from one model to another. A cover cap sticks onto the original cap; a replacement cap clips into its place. In terms of finish, gloss black is sporty and subtle, the carbon look more racing-inspired, and chrome more elegant.
Frequently asked questions
My mirror does not have a turn signal; is it compatible?
No. These caps are designed for mirrors with an integrated turn signal repeater. The shape will not match a mirror without a turn signal.
Is the adhesive included?
Yes, 3M automotive adhesive is pre-applied to the back of each cap. Simply remove the protective film during installation.
Do I need to drill or disassemble the mirror?
No. Installation requires no drilling: the cap sticks onto the original cap with double-sided adhesive. All that is needed is a clean, degreased surface.
Is it real carbon?
No. The carbon look is a printed and varnished finish on an ABS plastic base. It reproduces the woven carbon pattern at a much more affordable price and is weather-resistant.
Can I remove it later?
Yes. Gently heat the adhesive with a hairdryer, slide a nylon thread behind the cap to loosen it, then remove any residue with a suitable product. The original cap underneath remains intact.
Give your C-HR or Corolla a sporty look: order the pair of carbon-look caps.
Type: mirror cover caps
Vehicles: Toyota C-HR (2017-2021), Toyota Corolla (2014-2018)
Material: ABS
Finish: carbon look
Mounting: pre-applied 3M adhesive
Quantity: 2 pieces
Condition: new
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours
