Carbon-look wing mirror covers for BYD Atto 3, Seal U, Sealion 5 and 6, Song Plus
These wing mirror covers for BYD Atto 3, Seal U, Sealion 5, Sealion 6, Song Plus, Song Pro and Yuan Plus give the wing mirrors a carbon-look with raised fins, for a technical and sporty style. They are made of ABS with a glossy carbon-effect finish and fit over the original cover thanks to the pre-applied double-sided adhesive. Sold as a pair, they also protect the original housing from scratches.
Why choose this product
- Glossy carbon-look with a woven pattern.
- Raised fins for a sporty style.
- Double-sided adhesive pre-applied to the back.
- No drilling required; the original cover remains underneath.
- Several BYD models covered.
- Pair for the left and right sides.
BYD wing mirror covers: who are they for and what are they used for?
These carbon-look BYD wing mirror covers are designed for Atto 3, Seal U or Sealion drivers who want to personalize their electric SUV, which often comes with very understated body-colored wing mirrors. The fins add definition and a sporty touch, while the carbon-look finish matches other accessories in the same style. They also protect the original housing from rubbing and minor scratches.
Technical specifications
Type: wing mirror cover with fins. Material: ABS plastic with a carbon-effect finish (not genuine carbon fiber). Mounting: pre-applied double-sided adhesive. Quantity: 2 pieces (left and right). Stated dimensions: approximately 33 x 22 x 15 cm (packaging). Stated vehicles: BYD Atto 3 and Yuan Plus 2022-2026, Seal U 2024-2026, Sealion 5 2025-2026, Sealion 6 2024-2026, Song Plus 2023-2026, Song Pro 2024-2026.
Compatibility: check before ordering
Stated vehicles: BYD Atto 3 and Yuan Plus 2022-2026, Seal U 2024-2026, Sealion 5 2025-2026, Sealion 6 2024-2026, Song Plus 2023-2026 and Song Pro 2024-2026. For the Atto 3 Evo (2026), which has a redesigned wing mirror, please see our dedicated Atto 3 Evo covers instead. The wing mirror housing may vary depending on the model year and equipment: compare your wing mirror with the photos before ordering, and if in doubt, send us your model, year and a photo. Compatible depending on the model; please check before installation.
Installation
Step 1: park the vehicle in a sheltered area at a temperature of at least 15°C. Step 2: wash the original cover, degrease it with isopropyl alcohol and allow it to dry. Step 3: hold each cover up to the light to mark its position. Step 4: heat the adhesive tapes with a hairdryer, remove the protective film, position the cover and press firmly over the entire surface for 30 seconds. Step 5: wait 24 hours before washing. Allow 15 to 30 minutes for the pair.
Choosing the right wing mirror cover
First, choose the exact generation: the shape of the housing and the position of the indicator or camera vary from one model to another. A cover sticks over the original cover; a replacement cover clips into its place. In terms of finish, gloss black is sporty and subtle, carbon-look is more racing-inspired, and chrome is more elegant.
Frequently asked questions
Is it genuine carbon fiber?
No. The carbon-look finish is printed and varnished on an ABS plastic base. It reproduces the woven carbon pattern at a much more affordable price and is weather-resistant.
Do I need to drill or disassemble the wing mirror?
No. It is installed without drilling: the cover sticks over the original cover using the double-sided adhesive. All that is needed is a clean, degreased surface.
Are the wing mirror cameras or sensors left unobstructed?
The cover covers the top and back of the housing. Check the photos to ensure that the elements located under your wing mirror (camera, ground lighting, indicator) remain unobstructed.
Can it be removed later?
Yes. Gently heat the adhesive with a hairdryer, slide a nylon thread behind the cover to loosen it, then remove any residue with a suitable product. The original cover underneath remains intact.
Can the cover be washed?
Yes, once installed, it can be washed normally. Avoid using a high-pressure jet too close to the edges for the first few days.
Personalize your BYD in just a few minutes: order the pair of carbon-look covers.
Type: wing mirror covers with fins
Vehicles: BYD Atto 3, Yuan Plus, Seal U, Sealion 5, Sealion 6, Song Plus, Song Pro
Material: carbon-effect ABS
Mounting: pre-applied double-sided adhesive
Quantity: 2 pieces
Condition: new
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours
