Collection · 6 products
Citroën LED third brake light
Citroën LED third brake light for C1, Jumpy, Jumper. Complete LED module with OEM part number. Free delivery.
- Ships in 48 hours
- 2-year legal warranty
- Free fitment advice
Citroën LED third brake light
The third brake light, or high-level brake light, is a mandatory safety device — and one of the most likely to fail, because the original unit is sealed and its diodes burn out one by one. This collection covers the Citroën C1, Citroën Jumpy, and Citroën Jumper.
The units offered are complete LED modules that replace the original part, with the manufacturer's connector and the OEM reference listed on the product page when known. This avoids the common mistake of ordering based solely on the model, when two different references may exist depending on the production period.
LED illumination is instantaneous, without the warm-up time required by a filament bulb: the driver following you gains several dozen centimetres of reaction distance at 90 km/h. The smoked lens versions conceal the unit when it is off while retaining the required red colour when illuminated.
Replacement generally requires unclipping a tailgate trim or removing two nuts from inside the boot on a Citroën C1, as well as on Jumpy and Jumper vans. Allow twenty to thirty minutes, with no special tools required.
A faulty brake light is grounds for a retest at the MOT and an aggravating factor in the event of a rear-end collision. It is a part that should be replaced at the first sign of weakness, not at the last moment.
Compatible with the entire Citroën range
The Citroën models actually represented in this collection are: C1, Jumpy, and Jumper. Each product page specifies the generation, OEM reference, and relevant years: compare them with your vehicle registration document before ordering, as the same name often covers two different body styles.
Compatible models: C1, C2, C3, C4, C5, C5 Aircross, C-Elysée, Berlingo, Jumpy, Jumper, Xsara Picasso, DS3, DS4, and DS5.
Why choose this collection?
- Complete module: ready-to-fit LED unit with the original connector.
- OEM reference: listed on the product page when known, to eliminate any doubt.
- Instant illumination: no warm-up time, making it easier for the driver behind to see.
- Red or smoked lens: retains the required colour when illuminated.
Frequently asked questions
How do I identify the correct brake light for my Citroën? Compare the OEM reference marked on the original unit with the one listed on the product page, and check the production period: two different references are often available for the same model.
Will a smoked brake light pass the MOT? What matters is the colour emitted when illuminated, which must remain red, and the perceived intensity. Our guide details the points checked on smoked lights.
Is installation complicated? No: you generally need to unclip a tailgate trim or remove two nuts from inside the boot, then disconnect the connector. Allow twenty to thirty minutes.
Popular searches: Citroën C1 brake light • C1 brake light • C1 third brake light • C1 rear brake light • rear brake light • additional brake light • Citroën brake light • Citroën Jumpy brake light • Citroën Jumper brake light.
Also discover
- Citroën performance accessories
- LED third brake light
- Citroën LED rear lights
- LED bulbs
- LED indicators and repeaters
