Collection · 8 products
Peugeot logo door projector
Peugeot logo door projector: high-definition LED, wireless or wired version. Ten-minute installation. Free delivery.
- Ships in 48 hours
- 2-year legal warranty
- Free fitment advice
Peugeot logo door projector
The logo door projector projects the Peugeot emblem onto the ground when the door is opened. It is the ultimate welcome accessory: discreet by day, spectacular at night, and originally available only on the highest trim levels.
The kits offered operate with high-definition LEDs and a glass lens that projects a sharp logo, without a halo or blurred edges. Most are sold in pairs to equip both front doors, and some models cover all four doors.
Two technologies coexist. The wireless rechargeable battery versions stick to the bottom of the door with 3M adhesive and turn on via an opening sensor: no connection required, ten minutes to install. The wired versions replace the original courtesy lighting and plug into its connector.
On vehicles that already have door sill lighting, replacement is immediate: unclip the cover, disconnect it, and snap in the projector. On others, the wireless version avoids any trim removal.
A practical point often forgotten: clean the lens from time to time. Road dust and water splashes dull the beam and blur the logo long before the LEDs weaken.
Compatible with the entire Peugeot range
The kits in this collection are designed for the entire Peugeot range, as the projected logo is independent of the model. Each product page specifies the mounting method and the number of projectors delivered: check if your vehicle already has door sill lighting before choosing between the wired and wireless versions.
Compatible models: 106, 205, 206, 207, 208, 301, 307, 308, 407, 508, 2008, 3008, 5008, RCZ, Partner, Rifter, Expert and Traveller.
Why choose this collection?
- Sharp logo: glass lens and high-definition LEDs, without a halo.
- Two mounting options: rechargeable wireless version to stick on, or wired version on the original connector.
- Quick installation: ten minutes per door, without removing trim on wireless models.
- Sold in pairs: equip both front doors at once.
Frequently asked questions
Do I need to remove the door trim? No for wireless models, which stick to the bottom of the door. Wired versions only require unclipping the existing courtesy lighting cover.
What is the battery life of a wireless projector? Several weeks of normal use: the sensor only activates the LED when the door opens. Charging is done via USB with the projector removed.
Is the projected logo still visible in broad daylight? The output is designed for darkness and low light. In full sunlight, the beam remains barely noticeable, like factory-installed systems.
Popular searches: Peugeot door projector • Peugeot door light • Peugeot car door logo projector • wireless Peugeot logo projector • Peugeot door projected logo.
