LED Ambient Trunk Lighting Strip Tesla Model 3 Model Y Juniper

Useful tools

• Plastic trim removal kit
• Multimeter
• Cable ties
• Isopropyl alcohol

Fitting steps

1. Prepare the cable routing

   Work out where to place the strips on your Tesla and how to route the cables, behind the trim. Before fitting, check that the part received matches the "Vehicle model" option and the version ordered (White Warm, White Cool).

2. Cut the power

   Turn off the ignition and disconnect the negative battery terminal before touching the electrical circuit.

3. Clean and degrease

   Wash the fitting area, then degrease it with isopropyl alcohol. Let it dry completely.

4. Stick on the ambient lighting

   Dry-fit the ambient lighting, peel the film off the 3M tape, then press firmly for 30 seconds over the whole surface.

5. Plug in the connector

   Plug the ambient lighting into the original connector of your Tesla. No wires need to be cut.

6. Test the colors

   Switch on and test all the colors and the app or remote control.

• Secure the cables with ties to avoid rattles.
• Do not route any cable near the airbags.
• Fit above 59 °F (15 °C) and avoid washing for 24 h: the adhesive reaches full strength after that time.

• Delivery in 8 to 25 business days to France and Europe, 15 to 30 days to French overseas territories and the rest of the world. Shipping info.
• Tracked and insured shipping (loss, damage, theft): 9,95 €, free on orders over 99 €.
• 30 days after delivery to change your mind: item not fitted, in its original packaging.
• Tracking link sent by email as soon as your order ships. Shipping policy · Return policy