Gloss Black Trunk Lip Spoiler for 2016–2022 Mazda MX-5 Miata ND
Ships within 48 h · delivery in 8 to 25 business days · 30-day returns
Price in cart: 159,85 €
An extra −10% applied automatically, no code needed.
DescriptionEverything about this product
Mazda MX-5 ND trunk spoiler: the lip that finishes the roadster's line
This trunk spoiler adds the small rear fender flare that was missing from the Mazda MX-5 Miata ND (2016-2022) trunk lid. A trunk spoiler, also called a trunk lip or trunk cap, is a curved profile glued to the rear edge of the trunk lid: it extends the body line upwards, visually closes off the rear end, and provides a slight aerodynamic downforce at sustained speeds. On a roadster with a very rounded rear like the ND, the effect is immediate without ever resorting to a large wing.
Why choose this MX-5 ND spoiler
- Discreet and lightweight profile: weighing less than 700 g, it does not strain the trunk hinges or struts.
- Two finishes: gloss black lacquer for a sharp contrast, or carbon look woven for a competition look.
- Molded for the ND: the curvature follows the roadster's trunk edge exactly, without gaps or overhangs.
- High-speed stability: the lip return limits air separation at the rear and reduces the feeling of lightness on open roads.
- Adhesive installation: pre-applied automotive double-sided tape, no drilling of the trunk lid.
- UV-treated ABS: the color does not turn gray after two summers, unlike untreated plastic copies.
A discreet wing that matches the rest of the roadster
The MX-5 ND lends itself to understated touches: this trunk lip naturally matches black mirror caps, a rear diffuser, or dark wheels. With the top closed or open, the silhouette gains tension. The model is suitable for the 1.5 and 2.0 Skyactiv-G versions as well as the RF hardtops, whose trunk lid is identical. The post-2022 restyled models feature the same cut: to be checked before installation.
Technical specifications
Vehicle: Mazda MX-5 Miata ND, 2016 to 2022. Position: rear edge of the trunk lid. Material: UV-treated injected ABS. Finishes: gloss black lacquer or carbon look (printed woven pattern, not a fiber part). Weight: approximately 650 g. Fixing: pre-applied automotive double-sided tape. Length: approximately 125 cm, following the curve of the trunk. Supplied with: preparation wipe and installation instructions.
Installation and maintenance
Allow 30 minutes, in dry weather and above 15°C. Wash then degrease with alcohol the trunk edge, dry fit the spoiler to check the fit, and mark the alignment with masking tape. Remove the protective film in sections, apply the center first then the ends, and press firmly for 30 seconds per area. Leave 24 to 48 hours without washing or abruptly opening the trunk. Maintenance: standard washing, non-abrasive polish on the gloss black finish.
Frequently asked questions
What is the difference between a spoiler and a wing?
The spoiler extends the bodywork and redirects the airflow. The wing is a wing mounted on struts, detached from the trunk, with a much more sporty purpose.
Do I need to drill the trunk?
No. The mounting is done with the automotive double-sided tape already applied at the factory on the inner face.
Is the carbon look finish real fiber?
No: it is a printed woven pattern on ABS. The visual result is close, the price much more affordable.
Does the spoiler interfere with opening the trunk?
No. It follows the edge and the movement of the lid, without touching the top or the bumper.
Can it be removed later?
Yes, by gently heating the adhesive with a heat gun then passing a fishing line through. The original paint remains intact.
A tighter rear line in half an hour, without drilling and without going to the body shop: the trunk spoiler is the first modification to make on an ND.
Type: Trunk spoiler / trunk lip
Vehicle: Mazda MX-5 Miata ND 2016-2022
Material: UV-treated ABS
Finishes: Gloss black or carbon look
Weight: Approximately 650 g
Fixing: Pre-applied double-sided adhesive
Installation: 30 min, no drilling
Compatibility: Roadster and RF, depending on the version, to be checked before installation
Condition: 100% New
Vehicle compatibilityMazda MX-5 ND
- Mazda MX-52016-2022ND
Check before ordering
- Shape of the trunk lid or tailgate (sedan, wagon, coupe, 3 or 5 doors) and presence of a factory spoiler
Installation30 min · With or without drilling depending on the version, double-sided tape
Useful tools
Fitting steps
- Dry-fit the spoiler
Place the spoiler on the tailgate or trunk lid of your Mazda MX-5 ND (2016-2022) without fixing it. Mark its exact position with masking tape. Before fitting, check that the version received (Gloss Black, Carbon Look) is the one you ordered.
- Choose the mounting
Depending on the version, the spoiler is fitted with or without drilling. Hold the part in place and locate the original points before drilling anything.
- Clean and degrease
Wash the fitting area, then degrease it with isopropyl alcohol. Let it dry completely.
- Stick the spoiler on
Dry-fit the spoiler, peel the film off the double-sided tape, then press firmly for 30 seconds over the whole surface.
- Check the hold
Check that the spoiler is properly aligned and does not move. Open and close the trunk to make sure it does not touch anything.
- Ideally fit above 59 °F (15 °C), in dry conditions.
- Get someone to help you hold the spoiler while positioning it.
Shipping and returnsShips within 48 hours · 30 days to change your mind
- Delivery in 8 to 25 business days to France and Europe, 15 to 30 days to French overseas territories and the rest of the world. Shipping info.
- Tracked and insured shipping (loss, damage, theft): 9,95 €, free on orders over 99 €.
- 30 days after delivery to change your mind: item not fitted, in its original packaging.
- Tracking link sent by email as soon as your order ships. Shipping policy · Return policy
Mazda MX-5 ND trunk spoiler: the lip that finishes the roadster's line
This trunk spoiler adds the small rear fender flare that was missing from the Mazda MX-5 Miata ND (2016-2022) trunk lid. A trunk spoiler, also called a trunk lip or trunk cap, is a curved profile glued to the rear edge of the trunk lid: it extends the body line upwards, visually closes off the rear end, and provides a slight aerodynamic downforce at sustained speeds. On a roadster with a very rounded rear like the ND, the effect is immediate without ever resorting to a large wing.
Why choose this MX-5 ND spoiler
- Discreet and lightweight profile: weighing less than 700 g, it does not strain the trunk hinges or struts.
- Two finishes: gloss black lacquer for a sharp contrast, or carbon look woven for a competition look.
- Molded for the ND: the curvature follows the roadster's trunk edge exactly, without gaps or overhangs.
- High-speed stability: the lip return limits air separation at the rear and reduces the feeling of lightness on open roads.
- Adhesive installation: pre-applied automotive double-sided tape, no drilling of the trunk lid.
- UV-treated ABS: the color does not turn gray after two summers, unlike untreated plastic copies.
A discreet wing that matches the rest of the roadster
The MX-5 ND lends itself to understated touches: this trunk lip naturally matches black mirror caps, a rear diffuser, or dark wheels. With the top closed or open, the silhouette gains tension. The model is suitable for the 1.5 and 2.0 Skyactiv-G versions as well as the RF hardtops, whose trunk lid is identical. The post-2022 restyled models feature the same cut: to be checked before installation.
Technical specifications
Vehicle: Mazda MX-5 Miata ND, 2016 to 2022. Position: rear edge of the trunk lid. Material: UV-treated injected ABS. Finishes: gloss black lacquer or carbon look (printed woven pattern, not a fiber part). Weight: approximately 650 g. Fixing: pre-applied automotive double-sided tape. Length: approximately 125 cm, following the curve of the trunk. Supplied with: preparation wipe and installation instructions.
Installation and maintenance
Allow 30 minutes, in dry weather and above 15°C. Wash then degrease with alcohol the trunk edge, dry fit the spoiler to check the fit, and mark the alignment with masking tape. Remove the protective film in sections, apply the center first then the ends, and press firmly for 30 seconds per area. Leave 24 to 48 hours without washing or abruptly opening the trunk. Maintenance: standard washing, non-abrasive polish on the gloss black finish.
Frequently asked questions
What is the difference between a spoiler and a wing?
The spoiler extends the bodywork and redirects the airflow. The wing is a wing mounted on struts, detached from the trunk, with a much more sporty purpose.
Do I need to drill the trunk?
No. The mounting is done with the automotive double-sided tape already applied at the factory on the inner face.
Is the carbon look finish real fiber?
No: it is a printed woven pattern on ABS. The visual result is close, the price much more affordable.
Does the spoiler interfere with opening the trunk?
No. It follows the edge and the movement of the lid, without touching the top or the bumper.
Can it be removed later?
Yes, by gently heating the adhesive with a heat gun then passing a fishing line through. The original paint remains intact.
A tighter rear line in half an hour, without drilling and without going to the body shop: the trunk spoiler is the first modification to make on an ND.
Type: Trunk spoiler / trunk lip
Vehicle: Mazda MX-5 Miata ND 2016-2022
Material: UV-treated ABS
Finishes: Gloss black or carbon look
Weight: Approximately 650 g
Fixing: Pre-applied double-sided adhesive
Installation: 30 min, no drilling
Compatibility: Roadster and RF, depending on the version, to be checked before installation
Condition: 100% New
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours
