12V car battery jump starter with 150 PSI compressor and digital display
This car battery jump starter combines a 12 V jump starter, an automatic shut-off air compressor and a power bank in a single unit. Three formats are available: a compact black model, a compact purple or turquoise model, and a silver model with a handle. All serve the same purpose: jump-start a car alone and inflate a tire without waiting for help.
Why this jump starter with inflator saves time
- 12 V jump-starting: gasoline engines up to 5.0 L and diesel engines up to 3.0 L, depending on the manufacturer.
- 150 PSI compressor with a 22 mm metal cylinder and a stated flow rate of 23 L/min.
- Automatic shut-off: set the target pressure, and the pump turns off automatically.
- Backlit digital display readable at night, with a stated accuracy of plus or minus 1 PSI.
- Four units: PSI, BAR, KPA and kg/cm².
- LED light with SOS mode and Type-C output for charging a smartphone.
Car battery jump starter with compressor: which model to choose
The compact black model is available in 6000 and 8000 mAh; it fits in a door pocket or glove compartment. The purple and turquoise compact 8000 mAh versions feature a vertical design with a dual display. The silver model with a handle, available in 6000 or 8000 mAh, sits on the ground during inflation and includes a wide flashlight.
The peak current indicated on the model images is 600 A, sufficient for most city cars and compact cars. Each format comes with its clamps, a 36 cm air hose, a 3 m cigarette lighter cable, a USB charging cable and four valve nozzles.Technical specifications
Voltage 12 V, 6000 or 8000 mAh lithium polymer battery, operating range from -20 °C to 60 °C. According to the stated data, a standard tire goes from 0 to 2.5 bar in approximately 5 minutes and 30 seconds, and the device provides up to 25 jump-starts on a full charge under good conditions. Short-circuit, overload and overvoltage protection. These values are those stated by the manufacturer and vary depending on the temperature and the condition of the vehicle's battery.
Step-by-step instructions
To start, turn off the ignition, attach the red clamp to the positive terminal then the black clamp to the negative terminal, and start the engine. Disconnect within the next 30 seconds. To inflate, screw the nozzle onto the valve, choose the unit, set the pressure recommended by your vehicle's manufacturer and press the start button. Recharge the device after each use and at least every three months.
Frequently asked questions
Is 600 A enough to start my car?
For a gasoline city car or compact car, yes in most cases. For a large diesel engine in extreme cold, a higher-current jump starter is more suitable.
Does the compressor shut off automatically?
Yes, as soon as the preset pressure is reached, which prevents overinflation.
Can you inflate a bicycle or a balloon?
Yes, the included nozzles fit bicycle valves, balloons and inflatable items.
How do you recharge the device?
Using the included USB cable. The 3 m cigarette lighter cable also allows you to power the inflator directly from the vehicle's 12 V socket.
Choose your format and set off with peace of mind, with your battery and tires under control.
Type: Battery jump starter with air compressor
Voltage: 12 V
Peak current: 600 A according to the model images
Capacity: 6000 or 8000 mAh depending on the version
Maximum pressure: 150 PSI
Cylinder: 22 mm metal
Display: backlit digital display
Includes: clamps, 36 cm air hose, 3 m cigarette lighter cable, USB cable, 4 nozzles
Compatibility: 12 V vehicles, to be checked depending on the engine type
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours
