2-Inch 15-LED Car Hitch Cover

2-inch 15-LED trailer hitch cover: a finished look for the rear of your vehicle

This 15-LED trailer hitch cover fills the square opening of your receiver and adds a full-width light signature. Without it, a 2-inch trailer hitch leaves an open black hole exposed to mud, gravel, and corrosion, and completely invisible at night. Sliding into the receiver tube, this cover closes off the rear line and lights up an additional signal when you brake. The result: a clean look by day and a vehicle that is spotted sooner at night.

The light signature of the 15-LED trailer hitch cover, viewed from behind

The lens occupies a 3-1/4 x 3-1/4-inch square, exactly the size of a standard receiver tube section. The 15 diodes are evenly distributed to provide a solid light without hot spots or dead zones: from a distance, it appears as a uniform block rather than a string of small light sources. This is what distinguishes a real illuminated trailer hitch cover from a simple plastic cap.

The design also enhances the vehicle's appearance. When off, the housing blends into the bumper line and gives the impression of a complete, customized, and well-maintained vehicle—the opposite of an open receiver tube. The smoked lens version remains more discreet during the day: a universal trailer hitch cover that only reveals itself when you brake.

ABS, 200 lumens, and dual intensity: the technology behind this trailer hitch cover

The body is molded from ABS, a material chosen to withstand water spray and temperature fluctuations without cracking. The 15 LEDs consume 3 W and deliver a rated 200 lumens, and they are compatible with both 12 V and 24 V systems, making the cover suitable for light trucks and large SUVs. Unlike 9-LED models that offer only one level of brightness, this one provides two: a running light while driving and full power when braking. It does not flash with the turn signals. The entire unit weighs just 150 g and connects via a flat 4-way connector.

• 2-inch 15-LED trailer hitch cover — dual running light and brake light function, rated 200 lumens
• Receiver tube cover — seals the square opening against mud, gravel, and moisture
• Trailer hitch pin with lock — included with the cover, it locks the assembly to the vehicle
• Compatible with Class 3 and Class 4 trailer hitches — as well as Class 5, on 2-inch receiver tubes
• 12 V and 24 V power supply — suitable for sedans, SUVs, pickups, and light trucks
• Foam liner included — eliminates movement and rattling inside the receiver tube

Installing this trailer hitch cover on a 2-inch receiver tube

Installation requires no drilling: the cover slides into the receiver tube, the pin passes through the factory holes, and locks with a key. The electrical connection is the only other step. Hold the adapter at an angle, first engaging the pin marked with the red arrow, then push firmly. If a pin resists, straighten it slightly while inserting. This is the only tricky part of installing an illuminated trailer hitch cover, and it takes just one minute once you understand it. Check the actual size of your receiver before ordering: this model is designed for 2-inch receivers, but you should verify the version.

Are LED trailer hitch covers allowed on public roads?

This is the most frequently asked question. This device is an addition to your vehicle's required lighting and never replaces it: your original lights must remain functional and unobstructed. It serves as an additional rear visibility aid, particularly useful on pickups and tall SUVs with large rears. As with any added lighting accessory, its use on public roads must be checked according to current regulations and your vehicle.

Trailer hitches and towing: the category we know best

At Becquet Voiture, the trailer hitch category is not a minor department. Balls, coupler heads, hooks, covers, and anti-theft devices: we select them one by one, rejecting models whose specifications cannot be trusted. This trailer hitch cover was chosen for its rare dual-light function in this size. We communicate in French before and after purchase.

Close off your trailer hitch tube and gain an additional light signal: order your 15-LED trailer hitch cover now.

Type: 15-LED trailer hitch receiver cover
Brand: iJDM
Compatibility: 2-inch receiver tube, Class III, IV, and V trailer hitches — check before installation
Material: ABS and LEDs
Lens dimensions: 3-1/4 x 3-1/4 inches
Number of LEDs: 15
Rated luminous flux: 200 lm
Power: 3 W
Voltage: 12 V / 24 V
Functions: running light and brake light, without flashing with the turn signals
Available tints: Smoked, Red
Weight: 150 g
Rated certifications: ISO 9000, CE, ROHS, DOT
Contents: 1 LED trailer hitch cover, 1 trailer hitch pin with lock, 1 foam liner
Optional accessory: round-to-4-flat-pin adapter