10.1-Inch Autoradio Frame Renault Clio 4 ZOE 2012-2019

10.1-inch car radio frame for Renault Clio 4 and ZOE

Installing a 10.1-inch Android screen in a Renault Clio 4 is not just about the screen, but also what surrounds it. This fascia kit provides the complete adapter frame in gloss black ABS: the main plate with its mounting brackets, the console surround, and the two lower air vent covers. The car radio is not included: this product is the integration part, not the multimedia unit.

Six pieces in the kit and what they do

• Fascia plate: holds the 10.1-inch screen and screws into the original dashboard mounting points.
• Console surround: neatly closes the perimeter and hides the cutout.
• Two lower vent covers, matching the gloss black finish.
• Optional adapter harness: original connectors on one side, ISO and RCA on the other.
• CAN decoding box supplied with the harness: it retains the steering wheel controls and vehicle information.
• Antenna adapter included in the harness, with active antenna power supply.

Choosing the right version: generation and harness

The kit is first divided by dashboard generation: the Clio 4 from 2012 to 2016 and the facelifted Clio 4 from 2017 to 2019 do not have the same console design. It is then divided by harness type: type A and type B correspond to two Renault connector configurations that can be distinguished by removing the original car radio. Three options are therefore offered: the frame only, the frame with its harness, or the harness only if you already have the fascia. If in doubt about the plug type, photograph the connector behind your car radio before ordering. Compatibility is given by model and should be checked before installation.

Technical specifications

Type: car radio adapter frame, without screen. Material: ABS, gloss black finish. Screen size: 10.1 inches. Stated mounting dimensions: 250 x 146 x 240 mm. Electrical format: 2 DIN, ISO standard. Harness: type A or type B, with CAN box and antenna adapter. Vehicles: Renault Clio 4 and ZOE, 2012 to 2019. Condition: 100% new.

Installation: the order of operations prevents scratches

Start by disconnecting the battery, then remove the original console surround using a plastic spatula, never a screwdriver. Present the screen in the plate before reassembling the whole unit: this is when you can correct a few millimeters of play. Connect the harness and the CAN box, test the ignition, the steering wheel controls and the radio reception before permanently clipping the fascia in place. The supplier does not include any instructions and does not guarantee a cut-free installation or a trace-free removal: have these points confirmed by your installer. Models equipped with an original R-Link screen require special attention regarding network management.

Frequently asked questions

Is the car radio supplied with the frame?
No. This product is a fascia kit; the screen and navigation are not included.

What is the difference between type A and type B harnesses?
They are two Renault connector configurations. Identify yours by removing the original car radio.

Are the steering wheel controls retained?
With the CAN decoding box supplied with the harness, yes in most cases, depending on the installed multimedia unit.

Can you order the harness only?
Yes, type A harness only and type B harness only versions exist for those who already have the fascia.

Which screen to choose with this frame?
A 10.1-inch unit with the stated mounting dimensions. Check your screen's dimensions before purchasing.

A poorly fitted Android screen is immediately noticeable: the frame is what separates an original installation from a makeshift installation.

Type: Car radio frame, screen not included
Vehicles: Renault Clio 4 and ZOE 2012-2019
Material: Gloss black ABS
Format: 10.1 inches, 2 DIN ISO
Stated dimensions: 250 x 146 x 240 mm
Harness: Type A or type B, with CAN box
Instructions: Not supplied
Condition: 100% new