Window Deflectors Chevrolet Cruze Sedan 2009-2016 Set of 4

Chevrolet Cruze sedan window deflectors — drive with windows slightly open, even in the rain

This set of 4 window deflectors for the 2009-2016 Chevrolet Cruze sedan fits over the top of all four doors, finally allowing you to leave the windows slightly open in rainy weather. A side window deflector is a contoured acrylic blade that diverts airflow and water over the opening: the cabin stays ventilated, condensation clears, and nothing gets in. It also lets a car parked in the sun breathe without opening the doors to anyone.

Why choose these deflectors for a Cruze

• Set of 4 pieces: all four doors treated at once, with no mismatched appearance.
• Mass-tinted smoked acrylic: the tint is built into the material and won't fade in the sun like a film.
• Custom-contoured profile: the blade follows the sedan window frame exactly, with no unsightly gaps.
• Automotive double-sided adhesive: exterior installation with no cutting or drilling into the bodywork.
• Reinforced thickness: the blade does not vibrate at highway speeds, a common flaw in deflectors that are too thin.
• Rain and condensation resistant: airflow reduces condensation on the windshield in winter.

Wind deflectors: practical everyday uses

The first is ventilation in the rain: two centimeters of open window is enough to circulate the air without letting in a drop. The second is parking in the sun — with the windows slightly ajar, the interior remains significantly less stuffy. The third is for smokers and dog owners, for whom continuous odor removal makes all the difference. Note: this kit is designed for the 4-door sedan only and is not suitable for the hatchback version, whose rear door frames differ. Check compatibility before installation.

Technical specifications

Type: window deflectors with exterior adhesive installation. Quantity: set of 4 pieces (2 front, 2 rear). Material: mass-tinted acrylic. Tint: smoked. Mounting: pre-applied automotive double-sided adhesive. Stated compatibility: Chevrolet Cruze 4-door sedan, model years 2009 to 2016. Not compatible with the hatchback version. Care: soapy water, no solvents or scrapers.

Installation and care

Allow 20 to 30 minutes for all four. Work in temperatures between 15 and 25°C: if applied to cold metal, the adhesive will never bond properly. Clean the frame with isopropyl alcohol, hold the deflector up to the window to check the fit, and mark its position with masking tape, then remove the protective film while pressing from one end to the other. Leave it for 24 hours without opening or closing the doors forcefully, and avoid high-pressure washing for 72 hours. After that, wash normally: never scrape the acrylic when dry, as it will scratch.

Frequently asked questions

Do the deflectors withstand high-pressure washing?
Yes, once the adhesive has set, but avoid directing the spray nozzle directly at the joint from less than 30 cm away.

Do they whistle at highway speeds?
No, if they are properly pressed into place. Whistling almost always indicates that one end has partially detached.

Are they compatible with the Cruze hatchback?
No. This kit is specific to the 4-door sedan, as the rear door frames differ on the hatchback version.

Are they allowed at the vehicle inspection?
Deflectors fit above the glass surface and do not obstruct visibility. They are commonly accepted, provided they do not encroach on the field of vision.

Is the installation permanent?
It is reversible: a little heat from a hairdryer allows you to peel off the blade and remove the adhesive residue with a suitable product.

Four blades, half an hour, and you'll never have to close the windows at the first sign of rain again.

Type: Side window deflectors
Compatible make / model: Chevrolet Cruze 4-door sedan 2009-2016
Quantity: Set of 4 pieces
Material: Mass-tinted acrylic
Tint: Smoked
Mounting: Automotive double-sided adhesive
Installation: 20 to 30 minutes, no drilling
Condition: 100% New
Main function: Ventilation without rain or turbulence