Rear diffuser Seat Leon Cupra 5-door 2012-2020 gloss black

Useful tools

• Torx screwdriver
• Socket wrench
• Plastic trim removal kit
• Jack and jack stands
• Drill
• Metal drill bits

Fitting steps

1. Dry-fit the diffuser

   Place the diffuser under your vehicle's rear bumper and check the alignment with the exhaust outlets. Part designed for: Seat Leon 5F and MK3 and Cupra Leon 5F. Check that your vehicle is one of them.

2. Remove the original part

   Remove the screws and clips under the bumper, then unclip the original skirt or diffuser.

3. Mark and drill

   Hold the diffuser in place, mark the holes, then drill first with a small bit before the final diameter.

4. Protect and fix

   Deburr, apply an anti-rust product to the edges of the holes, then fix the diffuser with the hardware and seals.

5. Check the result

   Check the alignment with the exhaust outlets and the clearance from the ground.

• Check what is behind the panel before drilling (wiring, reinforcements).
• Put the vehicle on jack stands or a lift: never work under a car held up only by the jack.
• Let the exhaust cool down before working near it.

• Delivery in 8 to 25 business days to France and Europe, 15 to 30 days to French overseas territories and the rest of the world. Shipping info.
• Tracked and insured shipping (loss, damage, theft): 9,95 €, free on orders over 99 €.
• 30 days after delivery to change your mind: item not fitted, in its original packaging.
• Tracking link sent by email as soon as your order ships. Shipping policy · Return policy