Rear Diffuser Volkswagen Scirocco R 2015-2017

Volkswagen Scirocco R rear diffuser — a wide, low-slung rear end

This rear diffuser for the Volkswagen Scirocco R (2015, 2016, 2017) dresses the lower part of the rear bumper with vertical fins and two side fins. The car rear diffuser visually gives a compact coupé more width and a lower stance without affecting the exhaust line or bodywork.

Two designs to choose from: Type A or Type B

• Type A — 5-piece kit: 92.5 cm central diffuser, two 14 cm side fins, and a central red F1 light to be mounted in the center.
• Type B — one piece: 95 cm one-piece diffuser, wider fins, without F1 light or side fins.
• Carbon look: glossy woven finish, available on both types.
• Gloss black: deep lacquered finish, the best match for a black spoiler and dark wheels.
• Matte black: available on Type A, for a more discreet and less soiled appearance.
• High-strength adhesive and clip mounting: no drilling of the bodywork is required.

A diffuser designed for the Scirocco R rear bumper

The design follows the low cut of the Scirocco R rear bumper and allows the two original exhaust outlets to pass through. The F1 light on Type A connects to the brake light or fog light circuit depending on the chosen installation; it can also be used purely for aesthetics, without wiring, if you prefer to remain strictly original on the electrical side.

Technical specifications

Type: rear bumper diffuser. Width: 92.5 cm (Type A, plus two 14 cm fins) or 95 cm (Type B). Material: rigid injected ABS, resistant to debris and temperature fluctuations. Finishes: carbon look, gloss black, matte black depending on the version. F1 light: included on Type A only. Model: Volkswagen Scirocco R, model years 2015 to 2017 — compatibility to be checked according to the version before installation.

Installation and maintenance

Clean and degrease the lower part of the bumper, position the diffuser for a dry fit, mark the support points, then glue with the supplied double-sided adhesive, pressing firmly for several minutes. Allow 45 minutes to 1 hour for two people, in dry weather and above 15°C for the glue to set. Maintenance: standard washing, do not use a pressure washer within 30 cm of the glued edges.

Frequently asked questions

What is the difference between Type A and Type B?
The Type A is a five-piece kit measuring 92.5 cm with fins and an F1 light. The Type B is a 95 cm one-piece diffuser, without fins or light.

Is the diffuser installed without drilling?
Yes, it is installed using high-strength adhesive and clips on the original bumper. No cutting is required for the standard installation.

Do you need to remove the rear bumper?
No, in most cases. Removing it only makes it easier to route the cable if you connect the F1 light.

Is the F1 light approved?
It is sold as a styling accessory. Its use on public roads depends on current regulations: check before wiring it.

Is the carbon finish real carbon?
It is a carbon look applied to ABS, not structural woven fiber. The visual appearance is that of carbon, while the weight remains that of ABS.

Give your Scirocco R the rear end it deserves: choose your type and finish.

Type: Rear bumper diffuser
Compatible brand / model: Volkswagen Scirocco R
Years: 2015-2017
Material: ABS
Finishes: Carbon look, gloss black, matte black
Dimensions: 92.5 cm (Type A) or 95 cm (Type B)
Installation: Adhesive and clips, 45 min to 1 h
Condition: 100% New