LED License Plate Light Skoda Octavia II

LED license plate light for facelift Skoda Octavia II

The Octavia II phase 2 has a clean, well-designed rear end that two yellowed bulbs are enough to date. This LED license plate light for Skoda Octavia fixes this detail by completely replacing the original units with two modules containing 24 SMD 2835 LEDs. You don't just change a bulb: you replace the entire part, cover included. The difference is immediate on a 2009-2012 Skoda Octavia II facelift, and it lasts.

What 24 LEDs change on an Octavia 2 tailgate

The license plate is no longer a dark area of the bumper. The light is spread across the entire width, the numbers stand out, and the lower tailgate gains depth as soon as night falls. Those who have already switched their interior lights to LED finally get a consistent color between the inside and outside of the vehicle, which a simple original license plate bulb did not allow.

From the outside, the modification is invisible: the module takes the shape of the factory unit and fits exactly into the same cutout.

ABS housing and SMD 2835 LEDs: the construction of this Octavia module

Each module combines an SMD 2835 LED source with an ABS plastic housing, a material chosen for its resistance to temperature fluctuations and splashes. The stated power is 2.8 to 3 W at 12 V, for a flux of 400 to 420 lumens and an estimated lifespan of 50,000 hours. We stick to credible values for a LED license plate light module intended to replace an original part, not inflated figures: the goal is to properly illuminate the plate without dazzling the vehicle behind you.

• Skoda Octavia 2 LED license plate light — direct replacement, no adaptation required.
• 24 SMD 2835 LEDs per module — an even light across the entire plate.
• Durable ABS housing — designed for an area exposed to splashes and washing.
• 400 to 420 lumens — clear readability without a glare effect towards the rear.
• 50,000 hours stated — forget the ritual of changing the bulb every winter.
• Set of 2 modules — both sides replaced at once, for an identical result.

Changing the license plate lights on an Octavia II without special tools

Open the tailgate, locate the original unit in its cutout, push it sideways towards the spring to release the clip and pull it outwards. Disconnect, reconnect the LED module, reposition it until it clicks. This direct license plate light replacement requires no drilling, no wiring harness modification, or additional resistor. Fifteen minutes are enough for both sides, with a flat screwdriver wrapped in a cloth to avoid marking the paint. Stated compatibility: Skoda Octavia II facelift 2009, 2010, 2011 and 2012, to be checked according to the version before installation.

Should you change both sides at the same time?

Yes, and for a visual reason above all: a white LED module next to a yellowed filament bulb gives a mismatched result, immediately visible in photos. This is precisely why this license plate light kit is sold in pairs. Let's add the practical argument: if one of the original bulbs has failed, the other is the same age and will soon follow.

Skoda and LED lighting: our selection at Becquet Voiture

We spend time on these small parts because they make up a large part of the overall impression of a well-maintained vehicle. Each Skoda lighting accessory is judged on the quality of the housing, the consistency of the color, and the accuracy of the stated compatibilities. Our team is French and can be reached before purchase: take advantage of this if your Octavia is a borderline phase.

Give the rear of your Octavia II a clearly illuminated plate: order your pair of LED modules.

Type: LED license plate light modules
Compatible make / model: Skoda Octavia II facelift
Years: 2009, 2010, 2011, 2012 (to be checked according to version)
Product brand: KUNFINE
Light source: 24 SMD 2835 LEDs per module
Power: 2.8 to 3 W
Stated flux: 400 to 420 lumens
Voltage: 12 V
Material: LED source + ABS plastic housing
Stated lifespan: 50,000 hours
Installation: Direct replacement of the original unit
Contents: 2 LED license plate light modules