Honda CR-Z 2011-2016 LED License Plate Light

Honda CR-Z LED license plate lights: the finishing touch that reveals a well-maintained car

On a CR-Z, everything is sharply designed—except, often, the license plate illuminated by two yellowed halogen bulbs that betray the vehicle's age. This set of two Honda CR-Z LED license plate lights directly replaces the original bulbs and gives the rear a crisp white light, in line with modern diode lights. The change is immediately visible as soon as you reverse into an underground parking lot.

Five possible colors for your CR-Z's rear signature

White remains the homologatable choice and the one most faithful to the spirit of the hybrid coupe. But the selector also offers crystal blue, solid blue, red, and yellow, for those preparing their car for a meet or a photo session. The white LED license plate light for CR-Z diffuses a uniform light across the entire width of the plate, without the unsightly hot spot produced by filament bulbs. The contrast with the chrome of the tailgate is immediate, and the whole looks newer than it is.

Six 3030 chips per module, 600 lumens, and Canbus management

Each module features six 1.5 W SMD 3030 chips, totaling approximately 2 W and a stated flux of 600 lumens for the pair. The accepted voltage ranges from 9 to 18 V DC, which absorbs the variations of the onboard network at ignition without flinching. The circuit includes Canbus management: these error-free W5W license plate bulbs do not trigger the blown bulb indicator on the dashboard, unlike most budget LEDs. Consumption drops compared to the original halogen, and the stated lifespan reaches 50,000 hours, whereas a filament bulb gives up after a few winters.

• Compatible W5W T10 194 base—the same format as the original bulb, no adapter required.
• Canbus license plate LED—no error message on the instrument cluster, no resistor to add.
• Set of 2 modules—both sides are handled at once, for a symmetrical result.
• Low 12 V consumption—2 W total, a much lower operating temperature than halogen.
• Five colors to choose from—white, crystal blue, blue, red, or yellow depending on the desired look.

Replace your Honda CR-Z license plate lights in a few minutes

On the CR-Z, the license plate light housings unclip from the outside of the tailgate: a side push, a quarter turn on the socket, the old bulb comes out. Insert the LED, check the ignition, close it. Allow five minutes for both sides. The plug-and-play license plate light installation requires no drilling, no stripping, no removal of interior trim. If one of the two modules remains off, simply turn it halfway in the socket: the LEDs are polarized.

Are these LEDs approved for technical inspection?

French regulations require white license plate lighting. The white version of this set meets this appearance requirement, but the approval of a device is judged by the marking carried by the part: check it before a technical inspection. The colored shades are reserved for use on the track or at exhibitions. We prefer to tell you clearly rather than promise compliance that we cannot guarantee on the colored LED license plate lights.

LED lighting for Honda, a house specialty

Small lighting parts are those that transform a car the most for the least money: that is why we have made it a full family in our catalog. Each reference is linked to specific models rather than sold as a vague universal item, and our French team is happy to answer before purchase if you hesitate about the compatibility of your Honda license plate lighting.

Erase the last trace of yellow halogen on your CR-Z: order your pair of LED modules today.

Type: LED license plate light (set of 2)
Brand: VENDY
Compatible Brand / Model: Honda CR-Z
Years: 2011 to 2016—to be checked according to version
Base: W5W (T10 / 168 / 194 / 2825)
Chips: 6 SMD 3030 per module, 1.5 W per chip
Power: 2 W
Luminous flux: 600 lm stated
Voltage: 12 V (9-18 V DC range)
Error management: Canbus, no fault message
Stated lifespan: 50,000 hours
Colors: White, Crystal Blue, Blue, Red, Yellow
Package contents: 2 LED license plate light modules
Installation: direct replacement of the original bulb