Jeep Grand Cherokee LED license plate lighting: a crisp white under the tailgate
On a Grand Cherokee, everything is massive—except the small amber light that illuminates the license plate, which has lagged behind the rest. This Jeep LED license plate lighting corrects this discrepancy with two white modules rated at 7,000 K, mounted in place of the original units. The rear instantly regains its missing consistency, and this Canbus LED license plate light covers both the 2014–2020 Grand Cherokee and the Compass and Patriot.
3528 diodes and 300 to 400 lumens: the light the rear of the Jeep gains
The chips used are SMD 3528s, a proven format for this type of compact unit. The manufacturer rates the set at 300 to 400 lumens, with a 90° to 120° spread angle: the plate is illuminated across its entire width instead of being punctuated by a central halo. This white LED license plate lamp provides a cooler output than the original incandescent light, in the spirit of the LED daytime running lights on newer models.
The housing is made of plastic and retains the geometry of the original bracket; nothing protrudes, and nothing is visible from the outside. The rear lighting signature gains clarity without the part being noticeable.
No dashboard errors: the OBC management of these Jeep modules
This is the usual point of concern on vehicles in the group: a LED consumes too little, the computer thinks a bulb has burned out, and it turns on a warning light. These modules are rated as error-free on the OBC, so there is no warning message about a blown bulb. They accept a service voltage of 9 to 16 V DC at 3 W, withstand -35 to +55 °C, and are rated for 50,000 hours of use. This error-free license plate lighting also turns on in a few microseconds, a secondary but real advantage compared to a filament that takes time to heat up.
- Jeep Compass LED license plate lighting—also compatible with the Grand Cherokee and Patriot
- No OBC errors—no blown bulb message on the dashboard
- 7000 K white—a crisp shade, consistent with modern LED lighting
- Direct fit—no wiring or modifications required
- Rated for 50,000 hours—the part far exceeds the vehicle's ownership lifespan
- Sold as a pair—both sides replaced at once, identical color guaranteed
Changing the modules on a Grand Cherokee or Compass
Removal is done from the rear of the license plate bracket: unclip the original unit, disconnect the connector, position the LED module, and close it back up. Replacing an LED license plate light requires no wiring, cutting, or special tools—a flathead screwdriver protected by a cloth is enough to unclip it without marking the paint. If one module remains off on the first try, reverse the connector: the LEDs are polarized. Allow ten minutes for both sides.
Which vehicles are actually covered by this part number?
The manufacturer lists the 2014 to 2020 Jeep Grand Cherokee, the 2014 to 2017 Jeep Compass, the 2013 to 2017 Jeep Patriot, the 2013 to 2017 Dodge Viper, the 2013 to 2019 Fiat 500 US-market version, and the 2017 to 2020 Maserati Levante. The original list mentions the Patriot sometimes from 2013, sometimes from 2014: when in doubt, compare the shape of your current unit before ordering this LED license plate light, to be checked according to version and model year.
Converting your Jeep to LED, part by part
License plate lighting is often the first step in a complete conversion to LED: inexpensive, immediate, and it sets the tone for the rest. Becquter Voiture lists the units for most American and European models, prioritizing the Canbus-rated versions that prevent a return to the garage. A question about your Jeep Patriot license plate lighting or another model year? Write to us; we respond in French.
Replace both original units and give your Jeep a crisp rear look as soon as night falls.
Type: LED license plate lighting modules
Compatible makes / models: Jeep Grand Cherokee (2014-2020), Jeep Compass (2014-2017), Jeep Patriot (2013-2017), Dodge Viper (2013-2017), Fiat 500 US version (2013-2019), Maserati Levante (2017-2020)
Years: Depending on version—check before installation
LED type: SMD 3528
Color temperature: 7000 K white
Rated luminous flux: 300 to 400 lumens
Power: 3 W
Operating voltage: 9 to 16 V DC
Canbus management: Yes, rated as error-free on the OBC
Spread angle: 90° to 120°
Rated lifespan: 50,000 hours
Operating temperature: -35 °C to +55 °C
Material: Plastic
Installation: Direct replacement, no wiring or modification required
Contents: 2 LED modules
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours
