Skoda Octavia, Superb and Fabia LED license plate lights: the 6500 K white that brings the rear end to life
On an Octavia III or Superb B8, everything is sharp — except that little yellowish glow above the license plate, inherited from an old-fashioned bulb. This pair of LED license plate lights replaces the original housings with a clean 6500 K white, diffused by a clear lens. The result is visible at the first nighttime parking: the plate is illuminated from edge to edge, without hot spots, and the rear of the vehicle immediately looks newer. This set of 2 LED license plate lamps is one of the few changes that cost little and are noticed right away.
18 high-power SMD and clear lens: wide light, not a spotlight
The manufacturer states 18 SMD per pair, spread behind a front lens specially designed to spread the beam. This is what distinguishes a good 18SMD LED license plate lamp from a cheap module: without diffusion, the LED creates an intense central halo and leaves the ends in shadow. Here, the light covers the width of the European mount.
The startup is instantaneous: unlike a filament bulb, maximum power is reached as soon as the parking lights are turned on. The stated consumption is 3 W at 12 V, for a weight of 100 g per set. Brand stated by the manufacturer: carseeda.
A quality OEM replacement for the Skoda group models
The housings are designed to exactly match the original mounting: same footprint, same connector, same support surface. The covered manufacturer references are 5N0943021, 3AF943021A, 1K9943021A and 4G0943021 — this is the most reliable criterion to validate your vehicle, much more than the model year alone.
The stated compatibility list also goes beyond the only Czech brand: the same bases equip many Volkswagen, Audi and Seat models of the group. The complete detail is in the technical sheet below.
- 6500K LED license plate light — uniform cool white, without an amber halo.
- No error code stated — designed to avoid the blown bulb message, without reprogramming.
- Plug and play installation — direct replacement in the original housing.
- Clear front lens — wide diffusion across the entire plate.
- Identified OEM references — 5N0943021, 3AF943021A, 1K9943021A, 4G0943021.
Change the license plate lamps of a Skoda Octavia in a few minutes
The Skoda license plate light installation is done without removing the trim on most models: a side push releases the housing, you unplug it, you put it back. No drilling, no stripping wires. Protect the screwdriver blade with a cloth so as not to mark the tailgate, and check the direction of the clip before forcing. Allow five to ten minutes for both sides.
Will the dashboard report a defective bulb?
This is the legitimate fear on group vehicles, known for monitoring the consumption of every circuit. The manufacturer states a specific no error code design, without a blown bulb message and without reprogramming required. This remains to be checked according to the version and according to the trim level of your car: first compare the reference of your original housing with those listed above.
Your Skoda license plate light chosen by appearance part specialists
We list these modules based on what matters after two winters: the seal's hold, the color stability and the clip's strength. It is our job to sort out what looks alike in photos and behaves very differently on the road. Advice, order and follow-up in French.
Give your Skoda a license plate light worthy of the rest: order your LED pair today.
Type: LED license plate light
Stated brand: carseeda
Compatible brands: Skoda, Volkswagen, Audi, Seat (group)
Skoda models: Fabia III 2014- · Kodiaq 2016- · Octavia III 2013- · Rapid 2012-2015 · Superb III B8 2015- · Yeti 2014-
Volkswagen models: Golf VI Variant 2010- · Golf Plus 2012- · Jetta 2011- · Passat Variant 2011- · Sharan 7N 2011- · Touran GP2 2011- · Touareg II 2011-
Audi models: A1 8X 2016- · A3/S3 2016- · A4/S4/Allroad 2016- · A6/S6/Allroad 2016- · A7 2016- · Q3 2016- · Q7 2016-
Seat models: Alhambra 2011- · Ateca 2016- · Ibiza 2009- · Ibiza ST 2009-
Years: According to version, to be checked before installation
OEM references: 5N0943021 · 3AF943021A · 1K9943021A · 4G0943021
Light source: 18 high-power SMD
Color temperature: 6500 K, white
Voltage: 12 V
Power: 3 W
Stated weight: 100 g
Features: Plug and play, instantaneous startup, no error code stated
Contents: 2 LED license plate lights
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours
