Ford F-250 and F-350 Super Duty LED Door Lighting: White and Red Door Panels
This LED door lighting for Ford Super Duty replaces the factory courtesy lights located at the bottom of the door panels of the 1999-2007 Ford F-250, F-350, F-450, and F-550 Super Duty and the 2000-2005 Ford Excursion. Supplied as a pair, it illuminates the running board in white toward the ground and signals an open door in red toward the rear, where the original bulb only gave off a dim glow.
Why choose these Ford LED door lights
- 30 SMD 2835 LEDs per lamp: a uniform light surface that is much brighter than a filament bulb.
- Dual white and red function: a white zone to see where you step and a red zone to be seen by other road users when the door is open.
- Same format as the original part: the housing matches the original Ford part number F81Z-2523820-AA and snaps into the panel cutout.
- Polarity-free T10 (W5W) socket: the connector plugs in either way, with an adapter harness included.
- Reduced power consumption: 3 W per lamp, with a rated lifespan of over 50,000 hours.
Ford pickup door courtesy light: what is it used for
Getting out of a truck as high as a Ford F-250 Super Duty often happens at night on a construction site, a dirt road, or in a poorly lit parking lot. The door courtesy light located at the bottom of the interior panel illuminates the running board and the ground, while its red section acts as an active door reflector that warns vehicles approaching from behind. These LED door lights retain this dual function and make it significantly more visible. They are also suitable for the Excursion, which shares the same door panel as the Super Duty trucks of this generation.
Technical specifications
Source: 30 SMD 2835 LEDs per lamp, white 6500 K and red lighting. Rated flux: 188 lumens. Power: 3 W. Voltage: 12 V. Polycarbonate housing, clear and red lens. Dimensions: approximately 14.4 x 5.6 x 1.5 cm. Rated waterproof rating: IP67. Non-polarized T10 (W5W / 194) connector, built-in resistor for vehicles that monitor bulbs. Packaging: 2 lamps with their harness.
Installation and compatibility
Unclip the original lamp from the door panel using a plastic tool, disconnect the socket, plug in the LED lamp, then snap it into the cutout. Allow a few minutes per door. If your vehicle does not have a T10 socket in this location, the included harness connects to the positive and negative terminals of the door lighting power supply. Target vehicles: 1999-2007 Ford F-250, F-350, F-450, and F-550 Super Duty and 2000-2005 Ford Excursion, to be verified before installation by comparing the shape of your current lamp with the photos.
Frequently asked questions
Do these Ford LED door lights plug in directly?
Yes, on doors equipped with the original T10 socket. The included harness allows connection to other configurations.
Why is part of the lamp red?
It retains the signaling function of the original lamp: when the door is open, the red zone remains visible to vehicles approaching from behind.
Can an error message appear on the dashboard?
The lamp includes a resistor designed to prevent bulb alerts. If in doubt, test it before permanently snapping it in.
How many lamps are needed for a 4-door Super Duty?
A pair equips two doors. For a crew cab, allow for two pairs if the rear doors have the same housing.
Are the lamps resistant to moisture?
The housing is rated IP67, and the LEDs handle the vibrations of off-road use well.
Get clear and visible door lighting on your Ford Super Duty: order the pair and install it in a few minutes.
Type: LED door lighting (courtesy light and door reflector)
Target vehicles: Ford F-250, F-350, F-450, F-550 Super Duty 1999-2007, Ford Excursion 2000-2005 (to be verified)
Equivalent original part number: F81Z-2523820-AA
Lighting: White 6500 K and red, 30 LEDs
Power: 3 W, 12 V
Connector: T10 (W5W / 194) with harness
Packaging: 2 pieces
Condition: New
Customer reviews
Reviews from our customers
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
