Mercedes W164 car sun visor: the cover that makes a worn visor look new again
On the 2006–2012 Mercedes ML, GL, and R-Class models, the visor trim always eventually starts to peel away: the inner foam shifts, the fabric buckles, and the interior instantly loses its premium feel. This car sun visor cover restores the part to new condition without the need for a full replacement. You get a taut surface, a uniform color, and a visor that becomes invisible in your field of vision again—exactly as it should be.
A cut based on the original W164, W251, and X164 visor
The Mercedes visor from this generation has its own distinctive shape: a rounded edge on the headliner side, a recess for the mirror cover, and varying thickness toward the pivot axis. The cover follows this exact contour, with the opening for the vanity mirror placed in the right spot. Once slipped on, it pulls taut on its own and follows the shape without creases or bulges at the edges.
Three colors are available—gray, black, and beige—to match the original headliner. This is what makes the difference between a repair that stands out and a restoration that goes completely unnoticed. Many owners want a presentable interior car sun visor before selling their vehicle: the effect is immediate.
Taut fabric that restores the visor's shape
The fabric is a slightly stretchy technical textile, lined to hide irregularities in the original trim even where the foam has begun to break down. The peripheral seams are finished flush with the edge to avoid creating extra thickness that would prevent the visor from storing flat against the headliner. The color is solid throughout—no surface coating that could fade under UV rays, even though this driver's car sun visor spends its days facing the sun.
- Restoration without complete removal—the original visor stays in place; the cover simply slips over it.
- Opening for vanity mirror—the sliding cover remains fully accessible.
- Three colors to match the headliner—gray, black, or beige, depending on your interior.
- Driver or passenger side—sold individually, so you only replace what is needed.
- Anti-glare car sun visor—an opaque, matte surface for direct sunlight.
Dress your ML or GL visor in ten minutes
No special tools are required. Lower the visor, insert the cover by the free edge, slide it toward the pivot axis while aligning the opening with the mirror, and then distribute the tension from the center to the ends. If the visor is severely deformed, it may be helpful to remove it first so you can work comfortably—two screws on the headliner are all you need. Be sure to choose the correct side: the left and right cuts are not symmetrical. Designed for 2006–2012 W164, W251, and X164 models; check compatibility based on trim level and the presence of integrated lighting.
Should you repair the visor or replace it entirely?
This is the real question when deciding which car sun visor to choose for these models. If the hinge still holds and only the trim is peeling—by far the most common issue on these Mercedes models—the cover solves the problem for a fraction of the cost of a complete visor and without removing the headliner. However, if the visor no longer stays in the raised position or if the axis is loose, the internal mechanism is at fault, and only a full replacement will solve the problem. Test the hold before ordering: the diagnosis takes five seconds.
Restore the look of a Mercedes interior
We have made it a habit to look for parts that repair rather than replace whenever possible: it is more economical and often looks cleaner. A precise cut, fabrics that do not fade, and a French-speaking team to help you identify the correct side and color. On a large German SUV, an effective car sun visor that looks clean says a lot about the overall maintenance of the vehicle.
Choose your side and color, and restore your Mercedes to a flawless-looking interior.
Type: Replacement cover for interior sun visor
Compatible make/model: Mercedes-Benz ML-Class, GL-Class, R-Class (W164, W251, X164)
Years: 2006 to 2012 (check compatibility based on trim level)
Side: Left or right, sold individually
Color: Gray, black, or beige
Material: Lined technical fabric, solid-color
Cutout: Opening for vanity mirror
Installation: Slips over the original visor, no drilling required
Main function: Aesthetic restoration of the visor
Condition: 100% New
Customer reviews
Reviews from our customers
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
























































































































































































