Chrome Window Trim Seals Honda CR-V 2007-2011 Set of 4

Chrome Window Belt Mouldings for 2007-2011 Honda CR-V: Silent-Operating Windows

These exterior window belt mouldings replace the four lower window seals on the 2007-2011 Honda CR-V (CR-V RE generation). Over time, the rubber lip hardens, the window squeaks, water enters the door, and the chrome trim becomes pitted. This set of 4 window seals restores the vehicle's original chrome styling and eliminates window-lowering noise.

Why Replace the CR-V Window Belt Mouldings

• Set of 4 pieces: two front doors and two rear doors, left and right, in a single package.
• Chrome finish: the shiny trim replaces a faded or pitted moulding without the need for repainting or polishing.
• Flexible rubber lip: it wipes the window every time it is raised and prevents dust from scratching the glass.
• Restored sealing: less water in the door cavity means less corrosion and fewer power window failures.
• Integrated clips: the mounting uses the original anchor points, without drilling or adhesive.
• Eliminates window noise: no more squeaking or rattling when the window reaches its stop.

Door Weatherstrips: What They Really Do

A door weatherstrip, also known as a window moulding or window belt, performs three functions at once. It guides the window by limiting its lateral movement, wipes away water and dust to keep them out of the door panel, and enhances the vehicle's body line. When it wears out, the symptoms are always the same: a vibrating window when opened, whistling at highway speeds, limescale streaks on the glass, and a damp lower door panel. On a 2007-2011 CR-V, these mouldings are among the first parts to show wear.

Technical Specifications

Contents: 4 seals, front left, front right, rear left, rear right. Application: 2007-2011 Honda CR-V. Material: EPDM rubber on a steel frame. Finish: shiny chrome trim. Installation: exterior, on the lower edge of the window. Mounting: integrated clips. Durability: UV-resistant and frost-resistant. Tools: no special tools required.

Installation and Maintenance

Replace one door at a time without removing the interior trim. Lower the window completely, pry out the old seal by pulling up from one end, clean the channel with a cloth and alcohol, then snap the new seal into place, starting with the front corner. Allow approximately 15 minutes per door. Install in mild weather: the rubber snaps into place much more easily above 15°C. Maintenance: wipe with a damp cloth and apply a silicone conditioner once a year to keep the lip flexible. Check compatibility based on the trim level before installation.

Frequently Asked Questions

Do I need to remove the door panel?
No. The seals snap in from the outside with the window lowered. The interior trim remains in place.

Do these seals really keep water out of the door?
They prevent water from entering through the top of the door panel. If water is still coming from the windscreen or roof, a different seal needs to be checked.

Is the chrome painted or metallic?
It is a shiny chrome trim, like the finish on the original equipped versions.

My CR-V has black mouldings; can I switch to chrome?
Yes, this is one of the most common uses for this set: switching from black to chrome requires no other modifications.

My window squeaks when raised; is it the seal?
In the vast majority of cases, yes, the hardened lip is rubbing against the glass. A new seal resolves the noise immediately.

Are the original clips reused?
No, each seal comes with its own integrated clips.

Four new mouldings, fifteen minutes per door: your CR-V gets its chrome styling back and windows that raise silently.

Type: Exterior window belt mouldings
Contents: 4 pieces (front and rear, left and right)
Application: 2007-2011 Honda CR-V
Material: EPDM rubber on a steel frame
Finish: Shiny chrome
Mounting: Integrated clips, no drilling
Installation: Approximately 15 minutes per door
Compatibility: Varies by model; check before installation
Condition: 100% New