Side Skirts Rocker Panels Chevrolet Corvette C6 Z06 ZR1 2005-2013

Corvette C6 side skirts: the Z06 and ZR1 style side sills

These side skirts for the Chevrolet Corvette C6 replicate the design of the Z06 and ZR1 versions and close the gap between the two wheel arches. On a base C6, this is the part that visually lowers the car and gives it the stance of the more radical versions, throughout the entire 2005 to 2013 period.

What is included in the side sill kit

• 2 side skirts: one left, one right, molded in one piece along the entire length of the side sill.
• 2 rear deflectors: the mudflaps that extend the skirt behind the wheel and protect the paint from spray.
• Complete hardware kit provided: the set of self-tapping screws is included, no additional purchase required.
• Two finishes: gloss black or carbon look under clear coat, both ready to install.
• Reinforced ABS: a material that can be sanded and painted if you want to match the body color.

Side skirts for base Corvette C6, Z06 and ZR1

The Corvette C6 is available with standard bodywork and widebody work on the Z06 and ZR1, which have wider rear tracks. These side skirts are designed to replicate the styling language of these versions: a low blade that flows toward the rear and ends with a deflector. On a coupe or a convertible, the look is the same from the side. Check the width of your bodywork before ordering: a dry fit remains essential between a standard body and a widebody.

Technical specifications

Type: side skirts and side sills with deflectors. Contents: 2 skirts, 2 rear deflectors and hardware. Material: reinforced ABS. Finishes: gloss black or carbon look. Stated compatibility: Chevrolet Corvette C6, 2005 to 2013, standard bodywork and widebody depending on the version, to be checked before installation. Installation type: screwing under the side sill, with structural adhesive as a supplement. Condition: 100% New.

Installation and maintenance

Allow 2 to 3 hours, with the vehicle on jack stands or ramps to work comfortably under the sill. Degrease the area, dry fit the skirt and mark the mounting points with tape, drill gently only under the hidden edge, then screw from front to back, finishing with the deflector. A strip of structural adhesive along the length prevents vibrations at cruising speed. Pay attention to the ground clearance: a side skirt sits lower than the original sill, use caution on speed bumps and at parking garage entrances.

Frequently asked questions

How do you install side sills on a Corvette C6?
By screwing under the edge of the sill, after dry fitting and marking the points. Structural adhesive completes the hold along the length.

Is the carbon look real carbon fiber?
No, it is a carbon pattern under clear coat on an ABS base. The visual result is similar, and its UV resistance is better than vinyl.

Is this kit suitable for a C6 convertible?
The side sill is identical between the coupe and convertible on the C6. Nevertheless, check the body width, standard or widebody.

Can the skirts be painted to match the car's color?
Yes. The reinforced ABS can accept light sanding, a high-build primer, then base coat and clear coat, by a body shop.

Do you need to drill into the bodywork?
Only under the hidden edge of the sill, in a non-visible area. Treat each drilled hole with anti-corrosion treatment before screwing.

Give your Corvette C6 the low silhouette of the Z06 and ZR1: two skirts, two deflectors and the hardware, ready to install.

Type: Side skirts and side sills with deflectors
Compatible make / model: Chevrolet Corvette C6, coupe and convertible
Years: 2005 to 2013
Contents: 2 skirts, 2 rear deflectors, hardware
Material: Reinforced ABS
Finishes: Gloss black or carbon look
Installation: Screwing under the edge of the sill, structural adhesive as a supplement
Condition: 100% New