Audi TT MK1 Silicone Hose Kit — Say Goodbye to Worn-Out Rubber
This silicone hose kit replaces all the original cooling hoses in your Audi TT MK1 (8N chassis, 1998 to 2006), whether it has a 1.8T or 1.8T quattro 225 hp engine. After twenty years of heating and cooling cycles, the original rubber hardens, swells, and eventually fails at the worst possible moment: reinforced silicone does not age in the same way.
Why Switch to Reinforced Silicone Hoses
- Complete 18-Hose Kit: radiator circuit, heater core, expansion tank, and small auxiliary lines—everything you need.
- Rated from -50 to +180 °C: no deformation at the operating temperature of a turbo engine.
- Multi-Ply Polyester Reinforcement: the silicone hose does not bulge under pressure, unlike aging rubber.
- Three Colors Available: blue, red, or black, to match the color of your car's engine bay.
- Identical Molded Shapes: each bend follows the original geometry, so no forcing is required during installation.
- Longer Service Life: silicone does not crack from exposure to ozone and oil vapors.
Cooling Hose or Intake Hose: Do Not Confuse the Two
A cooling hose carries coolant between the engine, radiator, and heater core; an intake hose carries pressurized air between the turbo and intercooler. This Audi TT MK1 silicone hose kit is for the cooling system: it is the system that leaves pink puddles under the car and causes overheating. On a 1.8T that is over twenty years old, the original hoses are a maintenance item in their own right, just like the water pump or thermostat. Take advantage of the disassembly to inspect both parts.
Technical Specifications
18 pieces per set, made of reinforced silicone with three to four plies of polyester fabric, depending on the diameter. Operating range: -50 to +180 °C, with peaks up to 200 °C permitted. Rated for an operating pressure of approximately 4 bar. Smooth exterior surface, interior sized to match original specifications. Compatibility: Audi TT 8N from 1998 to 2006, with 1.8T and 1.8T quattro 225 hp engines. Hose clamps not included: plan to use new stainless steel clamps. Compatible depending on the version; check before installation.
Installation and Maintenance
Work with a cold engine. Drain the coolant, photograph the original hose routing, then replace the hoses one by one to ensure they are installed in the correct positions. Tighten the clamps without crushing the silicone. Refill with an G12-approved coolant, bleed the system while hot, and check the level after the first time the engine reaches operating temperature. Allow three to five hours, depending on your experience. After that, an annual visual inspection is all that is needed.
Frequently Asked Questions
Are silicone hoses really more durable?
Yes. Silicone does not harden with heating and cooling cycles and resists ozone, two of the main causes of rubber hose failure.
Is the kit complete for a TT MK1?
It includes 18 hoses covering the cooling system. Hose clamps must be purchased separately.
Is it suitable for the 225 hp quattro version?
Yes, the kit is available for the 1.8T and 1.8T quattro 225 hp 8N chassis.
Does the color affect performance?
No: blue, red, and black hoses share the same construction and operating temperature range.
Should the thermostat be replaced at the same time?
It is not mandatory, but highly recommended: the system is already drained, so the labor savings are significant.
Can this kit be installed without experience?
Yes, if you work methodically. Photographing each hose before removal is the best way to prevent connection errors.
Make your TT MK1 reliable for the next twenty years: this 18-hose silicone kit replaces a worn cooling system in a single operation.
Type: Cooling silicone hose kit
Compatible brand: Audi
Model: TT MK1 (8N chassis)
Years: 1998 to 2006
Engines: 1.8T and 1.8T quattro 225 hp
Contents: 18 hoses per set
Material: Reinforced silicone with 3 to 4 plies of polyester fabric
Temperatures: -50 to +180 °C
Colors: Blue, red, or black
Clamps: Not included
Compatibility: Depending on the version; check before installation
Condition: 100% New
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours
