12V 24V 4x4 Electric Winch Remote Control Kit

Winch remote control kit: make a non-wireless winch wireless

Many entry-level electric winches come with a single wired handle that is two or three meters long. It works, but it keeps you stuck next to the drum, in the worst possible place during a pull. This winch remote control kit connects in parallel with the solenoid box and makes any pre-installed 12V or 24V electric winch wireless without having to dismantle anything on the winch itself. It is the cheapest and most useful upgrade you can make to a 4x4 winch.

A plastic and metal combination: the construction of this X67A kit

The housing combines a plastic body with metal elements, a compromise chosen to keep it lightweight while withstanding drops on rocky ground. The unit fits in a jacket pocket and can be operated with one hand, which matters when the other is holding a rope or a phone. It remains a simple device: two controls, cable in and cable out, exactly the same functions as the original wired handle, but from wherever you choose. For occasional 12V winch remote control use, it is the right level of equipment.

What this kit actually replaces in a winching operation

The gain is not comfort, it is positioning. With a wireless winch remote control, you can stay in the driver's seat of the vehicle being pulled to correct the steering while the cable tightens, position yourself perpendicular to the cable's axis to monitor the spooling, or back away behind an obstacle if the anchor is moderately trustworthy. All winching safety recommendations revolve around this idea: do not stand in line with a line under tension.

• Compatible with 12V and 24V winches — one single reference for both voltages.
• Transmitter and receiver included — the complete set needed to switch your winch to radio control.
• Parallel installation — the original wired handle remains usable as a backup.
• Plastic and metal housing — lightweight, compact, fits in a pocket.
• For 4x4, quad, or trailer winches — the most cost-effective 4x4 electric winch accessory to use.

Connecting this kit to your winch's solenoid box

The principle is the same on almost all electric winches on the market: the receiver draws its power from the positive and negative of the battery, then controls the two control lines of the solenoid block. The original control is not removed; it remains connected in parallel. Place the receiver somewhere protected, inside or against the solenoid box, and keep the antenna away from metal masses to maintain range. Compatibility with your winch must still be checked before installation: it assumes a winch controlled by standard solenoids.

Do you need to provide batteries for this remote control kit?

Yes: the transmitter runs on a battery, which is not included in the kit. Have one ready before the first trip, and above all, keep a spare in the glove box: a remote control that remains unused for six months rarely wakes up at the right time. This is also the reason we advise never to remove the original wired handle: it does not depend on any power source other than the vehicle's battery.

Winch accessories, a range we are continuously expanding

At Becquet Voiture, we do not just line up winches: we also stock what makes them truly usable at the side of a path. This remote control is part of the equipment we systematically recommend to anyone who has just installed an all-terrain recovery winch delivered with only a wired control. Technical questions and order tracking in French.

Free yourself from the wire: equip your winch with its radio control and finally choose where you stand.

Type: Wireless remote control kit for electric winch
Manufacturer reference: X67A
Compatibility: 12V and 24V solenoid electric winches — 4x4, quad, trailer, all-terrain — to be checked before installation
Operating voltage: 12V / 24V
Material: Plastic and metal
Transmitter power supply: Battery-powered
Batteries: NOT included
Connection: In parallel with the control lines of the solenoid box
Contents: 1 control transmitter + 1 receiver