Front Blade Ford Fiesta MK8 ST ST-Line 2017-2021

Ford Fiesta MK8 Front Lip: the ST Grounded

This front lip screws onto the bumper of the Ford Fiesta MK8 ST and ST-Line (2017-2021) and visually lowers the entire front of the vehicle. It is the modification that changes the silhouette of a latest-generation Fiesta the most without touching the suspension: the car looks lower, wider, and the original bumper finally gains definition. Two finishes to choose from: gloss black or carbon look.

Why choose this front bumper lip

• Specific MK8 design: the outline follows the ST and ST-Line bumper exactly, with the cutouts falling in line with the air intakes.
• High-quality ABS: more flexible than fiberglass, it withstands a poorly negotiated speed bump without cracking.
• Screw mounting and hardware included: the installation is mechanical and durable, not a simple double-sided adhesive that gives out at the first wash.
• Gloss black or carbon look: gloss black extends a dark exterior pack, the carbon look stands out on a light shade.
• Immediate visual aerodynamic effect: the lip closes the bottom of the bumper and creates a continuous shadow under the front.
• Protective varnish: the surface is protected against the haze of prolonged exposure to the sun.

MK7 or MK8: do not choose the wrong generation

The Fiesta changed generations in 2017. The MK8 is immediately recognizable by its tapered headlights and its wider trapezoidal grille, where the MK7 displayed rounder headlights and a shorter bumper. The two bumpers have neither the same mounting points nor the same shape: an MK7 lip does not fit on an MK8. This part is intended for the MK8 phase 1, model years 2017 to 2021, in ST or ST-Line trim. It is not intended for the Standard trims, nor for the post-2021 facelift.

Technical specifications

Type: front bumper lip, also called a splitter.
Model: Ford Fiesta MK8, ST and ST-Line trims.
Years: 2017 to 2021, phase 1 only.
Material: high-quality ABS plastic.
Finishes: gloss black or carbon look.
Mounting: screws, mounting accessories included.
Position: front, lower part of the bumper.
Weight: 1.8 kg.
Contents: 1 front lip kit and its hardware.

Installation and maintenance

Allow 1 to 2 hours. Present the lip dry, with the vehicle on flat ground, to identify the support points and check the symmetry of the gaps before drilling anything. The installation is then done by screw into the bottom of the bumper, starting from the center and then moving up towards the ends. The manual is not provided and professional installation is strongly recommended. In use, adopt the reflex of lowered cars: approach speed bumps at an angle and slow down at the entrance of underground parking lots. Maintenance: normal wash, wax to revive the gloss black, check the tightness twice a year.

Frequently asked questions

Is this lip suitable for a Standard trim Fiesta?
No. The bumper of the Standard trims has a different design: the part is intended for the ST and ST-Line bumpers.

Do you need to drill the bumper?
Yes, the mounting is done by screw into the lower edge of the bumper, an area that is not visible once the lip is in place.

Is a front lip approved?
It does not modify the lighting or passive safety, but any bodywork modification remains subject to current regulations. Find out before a technical inspection.

Which finish ages best?
Gloss black requires occasional polishing; the carbon look hides everyday micro-scratches better.

Does the lip rub on the curbs?
It lowers the bottom of the bumper by a few centimeters. On a Fiesta with original height, driving remains normal, but parking in reverse against a high curb requires attention.

Finally give your MK8 Fiesta the low line it deserves: choose your finish and order.

Type: Front bumper lip
Compatible brand and model: Ford Fiesta MK8 ST and ST-Line
Years: 2017 to 2021
Material: ABS plastic
Finishes: Gloss black or carbon look
Mounting: Screws, hardware included
Installation: Professional installation strongly recommended
Condition: 100% New