Front Blade Peugeot 308 T9 GT GT-Line 2016-2021 3 Pieces

Peugeot 308 T9 front lip: three pieces that transform the front end

This front lip for Peugeot 308 T9 GT and GT-Line (2016-2021) consists of three parts that follow the contours of the bottom of the phase 2 bumper: a central section and two side extensions. The result is much more pronounced than with a single-piece lip: the front gains a continuous line from one wheel arch to the other, and the 308 immediately appears lower and wider.

Why choose this three-piece bumper lip

• Three distinct elements: the cutouts follow the contours of the GT bumper, unlike a one-piece lip which leaves gaps at the ends.
• Original fitment: the design follows the phase 2 bumper, with the mounting points falling on the existing ribs.
• High-quality ABS: lightweight and resilient, it can withstand a curb strike without cracking like a fiber part.
• Gloss black finish protected by a UV-resistant clear coat: the color remains deep and does not turn gray after two summers.
• Hardware included: the mounting is mechanical, not just an adhesive that fails at the first high-pressure wash.
• Immediate contrast on light colors: on a white, gray, or red body, the black lip creates a sharp shadow under the bumper.

Phase 1 or phase 2: check before ordering

The Peugeot 308, second generation, T9 type, was facelifted in 2017. The front bumper design changed: the phase 2 is recognizable by its wider grille and vertical fog light surrounds, whereas the phase 1 had a smoother bumper. This lip is designed for the phase 2 GT or GT-Line trims, five-door hatchback body style. It is not intended for the entry-level trims or the estate version. If in doubt, send us a photo of your front end: we will check it before shipping.

Technical specifications

Type: 3-piece front bumper lip.
Model: Peugeot 308 MK2 T9, GT and GT-Line trims.
Years: 2016 to 2021, phase 2.
Body style: 5-door hatchback.
Material: high-quality ABS plastic.
Finish: gloss black with UV-resistant clear coat.
Mounting: hardware included.
Position: front, lower section.
Contents: 1 three-section lip and its hardware.

Installation and maintenance

Allow 1 to 2 hours. Hold the three sections together while dry, with the vehicle on level ground, and mark the mounting points with masking tape before drilling: this is the step that ensures the gaps are symmetrical on the left and right. Then install the central section, followed by the two side sections from the center outward. No instructions are provided, and professional installation is strongly recommended. When driving, adopt the habits of a lowered car: approach speed bumps at an angle and be careful entering parking garages. Maintenance: wash normally, and wax occasionally to revive the black finish.

Frequently asked questions

Is this lip suitable for a phase 1 308?
No. The phase 1 bumper has a different design: the part is intended for the phase 2, model years 2016 to 2021, in the GT or GT-Line trim.

Do I need to drill the bumper?
Yes, it is mounted with screws into the lower edge of the bumper, an area that is invisible once the lip is installed.

Why three pieces instead of one?
Because the GT bumper is not flat: three sections follow the contours without stress, and transport is much less risky than with a 1.5-meter-long part.

Can it be painted to match the body color?
Yes, ABS can be painted after light sanding and the application of a plastic primer.

Is a front lip approved?
It does not affect the lighting or passive safety, but any bodywork modification remains subject to current regulations.

Give your 308 GT the front end Peugeot didn't dare give it: order your three-piece lip.

Type: 3-piece front bumper lip
Compatible make and model: Peugeot 308 T9 GT and GT-Line
Years: 2016 to 2021, phase 2
Material: ABS plastic
Finish: Gloss black, UV-resistant clear coat
Mounting: Hardware included
Installation: Professional installation strongly recommended
Condition: 100% New