VW Rear LED Logo Golf 5 6 7 Chrome 110mm

Useful tools

• Plastic trim removal kit
• Multimeter
• Terminals and heat-shrink tubing
• Isopropyl alcohol

Fitting steps

1. Prepare the power supply

   Locate a protected 12 V power supply (parking lights or after ignition) on your Volkswagen Golf MK5 and the cable route. Stated measurement for this model: 110 mm diameter.

2. Remove the original emblem

   Turn off the ignition and disconnect the battery. Remove the original emblem (adhesive or pins); on a grille, it often has to be removed.

3. Clean and degrease

   Wash the fitting area, then degrease it with isopropyl alcohol. Let it dry completely.

4. Stick the logo on

   Dry-fit the logo, peel the film off the double-sided tape, then press firmly for 30 seconds over the whole surface.

5. Connect the power

   Connect the positive wire to a fused 12 V supply and the ground wire to a metal point. Insulate every connection.

6. Test the lighting

   Turn on the ignition and the lights: the emblem must light up steadily.

• Check the regulations: an illuminated front logo may be banned on public roads depending on its color.
• Fit above 59 °F (15 °C) and avoid washing for 24 h: the adhesive reaches full strength after that time.

• Delivery in 8 to 25 business days to France and Europe, 15 to 30 days to French overseas territories and the rest of the world. Shipping info.
• Tracked and insured shipping (loss, damage, theft): 9,95 €, free on orders over 99 €.
• 30 days after delivery to change your mind: item not fitted, in its original packaging.
• Tracking link sent by email as soon as your order ships. Shipping policy · Return policy