Ford Ranger T9 Side Steps: Get into the Pick-up Without Hopping
A Ranger T9 is tall. Very tall. This Ford Ranger T9 side step brings the first step down to knee height and completely changes the way you get on board—for you, for children, and for passengers who aren't climbers. And while comfort improves, the silhouette gains: the pair highlights the lower bodywork and gives the pick-up a fuller stance that the original versions lack. A step for the 2023 Ranger is not just a convenience; it also visually completes the vehicle.
A Lower Line That Fleshes Out the Ranger Wildtrak Silhouette
Seen from a three-quarter angle, the pick-up looks wider and better planted on its wheels. The step runs the full length of the cab, from the front door to the rear door, and fills the gap under the lower bodywork that gives stock 4x4s an unfinished look. The black finish—matte lacquer or sandblasted powder coating depending on the series announced by the manufacturer—pairs equally well with light bodywork or an all-black Ranger.
The stepping surface features a non-slip texture or added pads: it's this detail that makes the difference on a rainy morning, when the sole is muddy and the step of an ordinary pick-up side step becomes an ice rink.
Construction Steel and 13.5 kg Announced: The Robustness of This Ranger Side Step
The structure is made of construction steel, with some series announced in high-strength manganese steel. The rigidity is immediately noticeable: the step does not flex under an adult and withstands contact with a bank, a curb, or a rock during off-road use. The announced weight of 13.5 kg for the pair says enough to show that this is not a decorative hollow profile. The supplier package dimensions are 77 x 68 x 32 cm.
- Ford Ranger T9 Steel Side Step—massive structure, 13.5 kg announced for the set
- No-Drill Installation—uses the chassis's original mounting holes
- Non-Slip Surface—secure footing in wet weather or with muddy shoes
- Complete Pair Delivered—left side and right side, brackets and hardware included
- Easier Cab Access—valuable for children and elderly passengers
- Lower Bodywork Protection—limits splashes and parking scratches
Installing These Side Steps on Your Ranger T9 Without Drilling the Body
The installation is done on the factory mounting points: park on flat ground, remove the covers from the pre-drilled holes in the chassis, align the brackets, screw them in, then fix the step to the brackets before repeating the operation on the other side. No drilling, no cutting: the bodywork remains intact and the installation is reversible. Allow for a helper to position the bar; it is heavy. Retighten the hardware after the first few kilometers, then check it periodically.
Will This Side Step Fit All Ranger T9 Trims?
The manufacturer announces compatibility with the 2023 to 2025 model year Ford Ranger T9 in its Wildtrak, Platinum, XLT, and Limited trims. However, the Raptor version is not compatible: its widened bodywork and specific appendages change the mounting points. Previous T6, T7, and T8 generations are also excluded. The supplier title also mentions a retractable version of this range: the reference described here corresponds to the fixed steel side step; check the desired version before ordering.
Equipping a Pick-up: What We Check Before Listing a Side Step
For this family, two criteria stand out: the actual material of the structure and the nature of the installation. Steel announced with its weight and installation on original mounting points—that is what we ask before accepting a Ranger side bar reference in the catalog. Any doubt about your exact trim? Write to us; we will check with you.
Give your Ranger T9 the step it's missing: order your pair of steel side steps now.
Type: Side step / pick-up side bar
Manufacturer Brand: DUKE4WD
Compatible Brand / Model: Ford Ranger T9—Wildtrak, Platinum, XLT, Limited
Years: 2023 to 2025 (T9 range)
Incompatible: Ranger T9 Raptor, Ranger T6, T7, and T8
Material: Steel; high-strength manganese steel depending on the announced series
Finish: Matte black or powder coating depending on the version
Announced Weight: 13.5 kg
Package Dimensions: 77 x 68 x 32 cm
Placement: Side, left side and right side
Installation: No-drill, on the chassis's original mounting holes
Version: Fixed steel side step—a retractable version exists from the manufacturer, to be confirmed before ordering
Contents: 1 pair of side steps, mounting brackets, hardware
Maintenance: Regular cleaning, rinsing after mud, salt, or sand
Customer reviews
Ordered this product from us? Leave a review and add your photos: it helps other enthusiasts choose.
- 30 daysto change your mind
- Legal warranty2-year conformity guarantee
- Expert advicereply within 24 business hours
