Risingon QP1008 Rearview Radar LCD Screen 4 Sensors

Risingon QP1008 reversing radar: the distance clearly displayed on the screen

A beep that gets faster is good. A number that tells you exactly how much is left is better. This Risingon QP1008 car reversing radar combines four 22 mm ultrasonic probes with a small color screen placed on the dashboard, which displays the distance and the position of the obstacle while the tone gets faster. On a car without factory parking assistance, this reversing radar kit with screen turns Saturday morning parallel parking into a breeze.

The QP1008 color screen, readable at a glance

The monitor sits where your eyes naturally fall when reversing: on top of the dashboard, or near the rearview mirror. It combines three pieces of information — the numerical distance, a progress bar, and the side from which the obstacle comes. The manufacturer lists it as a backlit color digital screen; this is what distinguishes a real Parktronic parking assistance system from a simple buzzer hidden under the rear shelf.

The probes, meanwhile, come in seven shades: silver, champagne gold, blue, red, gray, white, and black. Choose the one that most closely matches the bumper paint and the four dots visually disappear. A well-matched rear parking sensor is no longer noticeable as soon as you take two steps back.

40 kHz ultrasound and dual processor: the internal mechanics of the Risingon

Each probe emits a 40 kHz pulse and measures the return time of the echo; the box combines the four measurements to locate the obstacle. The kit works on 12 V DC within a range of 9.6 to 16 V, with a stated consumption of 20 to 180 mA — enough to run on the reverse light circuit without straining the battery. The obstacle detection from 0.3 to 2.5 m covers both the parking post and the low wall. The control module is rated for -30 to 80 °C, and the probes are made of ABS, a plastic that withstands high-pressure washing and gravel projections.

• 4-sensor reversing radar — the standard configuration for the rear of a sedan or city car
• 22 mm ultrasonic sensor — standard diameter, easy single replacement
• Color distance screen — the numerical value in addition to the audible alert
• 12 V universal reversing radar — no intervention on the original electronics
• Seven probe shades — to match the sensors to the bumper color
• Flush-mount, so-called invisible — no protruding collar on the bumper

Drilling the bumper and wiring the QP1008 to the reverse light

The principle is unchanging: four 22 mm holes evenly distributed on the rear bumper, between 50 and 60 cm from the ground, then the cables routed up to the control box housed in the trunk. The power is tapped into the positive wire of the reverse light, so that the system only activates when reversing. A no-drill reversing radar installation is incompatible with flush-mount probes: that is the price of discretion. Allow yourself half a day on your own, much less with a professional. Mounting on a metal bumper is not recommended, to be checked depending on the version.

Screen or simple buzzer: which one to choose for reversing?

The buzzer alone is enough if you always park in the same place and know your landmarks by heart. The screen becomes valuable as soon as you need to maneuver by the centimeter, between two tight cars, or when the rear window is narrow. It also indicates which side the obstacle is on, information that sound does not provide. This is why many drivers prefer this car reversing sensor with a screen, even if it means running an extra cable through the interior.

The parking assistance range of Becquet Voiture

We keep several kit formats in our catalog — buzzer only, LED screen, color screen, 4 to 8 probes — because no car asks for the same thing. This Risingon was selected for its informative screen and its range of colors, one of the most complete for 22 mm probes. Hesitating about the shade or the number of sensors for your car parking sensor? Our French-speaking team answers before and after the order.

Choose the shade of your probes and equip your car with the Risingon QP1008 reversing radar.

Type: 4-sensor reversing radar kit with screen
Brand: Risingon
Model: QP1008
Number of probes: 4
Probe diameter: 22 mm
Mounting type: flush-mount, so-called invisible
Detection distance: 0.3 to 2.5 m
Nominal voltage: 12 V DC
Voltage range: 9.6 to 16 V DC
Nominal current: 20 to 180 mA
Ultrasonic frequency: 40 kHz
Module operating temperature: -30 to 80 °C
Material: ABS
Display: backlit color digital screen, as stated by the manufacturer
Probe colors: silver, champagne gold, blue, red, gray, white, black
Compatibility: 12 V cars with plastic bumpers — to be checked before installation