Trunk Mat Mazda 6 GG Sedan 2002-2007 EVA

Mazda 6 GG trunk mat: restore the trunk of a sedan that has seen better days

A first-generation Mazda 6 GG is now approaching twenty years, and the trunk is often what betrays its age: shiny carpeting, stains, and a persistent odor. This molded EVA Mazda 6 trunk mat resets the clock in a minute. It fully covers the cargo floor, conceals worn carpeting, and prevents any new dirt from reaching the fabric. For a sedan you want to keep for a few more years, it is the most cost-effective investment in our catalog.

Cut specifically for the GG and GG1 sedan, not a universal mat

The mold follows the contours of the trunk of the Mazda 6 sedan produced from 2002 to 2007, including GG and GG1 versions and the Mazdaspeed6: wheel wells, sill, and rear corners. The custom-fit trunk mat lays flat without wrinkles, uncovered areas, or the need to trim anything with a utility knife. The 3D lip running around the entire perimeter keeps water and mud inside the tray: the very principle of a waterproof trunk liner.

The uniform matte black gives it an immediate clean look, even if the original carpeting is stained. It makes a real visual difference when you open the trunk in front of a buyer.

Molded EVA rather than a standard rubber mat

EVA thermoplastic rubber foam remains flexible in cold weather, weighs little, and absorbs shocks—three areas where traditional rigid rubber disappoints. This EVA trunk mat is waterproof, scratch-resistant, and resistant to commonly used chemicals. Its surface is non-slip, which prevents a gas can or crate from sliding from one side to the other with every turn. It can be hosed out and dries in a few minutes.

• Mazda 6 GG1 trunk mat — cut for the 2002-2007 sedan, including the Mazdaspeed6.
• Waterproof floor protection — raised lip against spills.
• Conceals worn carpeting — immediate clean look on an older vehicle.
• Express cleaning — easy to remove, hose out, and dry.
• Temperature resistant — does not harden in winter or deform in summer.
• Non-slip surface — cargo stays in place.

Placing the mat in the Mazda 6 trunk without tools

Nothing to drill or glue: empty the trunk, unroll the liner, and it will fit into the corners on its own. Installing the trunk mat takes less than a minute. Due to its size, the product is shipped folded or rolled: turn it over and fold it in the other direction, or leave it in the sun for a few hours, then in the vehicle for a day or two so that it regains its molded shape. A slight odor upon opening is normal and disappears after airing out. Check the shape of your trunk before purchase: this cut is designed for the sedan, not the estate.

Is a trunk mat useful on an older car?

Even more so than on a new one. On a 2005 Mazda 6, the carpeting is already weakened, and every new stain is permanent. Installing a Mazda trunk protector stops the deterioration, restores a clean look without professional cleaning costs, and can be removed when you sell the car if you want to keep it for your next vehicle. The cost-to-benefit ratio is unbeatable.

Car mats, a family we know line by line

Floor mats, trunk mats, molded trays, leather or EVA: we follow these references by chassis, because a difference of one generation is enough to make a cut unusable. Are you hesitating between GG and GH? Give us the exact year of your car trunk mat and we will confirm it before you validate the order.

Order this Mazda 6 GG trunk mat and give your sedan a flawless trunk starting this week.

Type: Molded rear trunk mat / liner
Compatible brand / model: Mazda 6 GG / GG1 sedan, Mazdaspeed6
Years: 2002 to 2007 (including 2003, 2004, 2005, 2006)
Material: EVA (thermoplastic rubber foam)
Color: Black
Edge: Raised 3D anti-overflow lip
Properties: Waterproof, non-slip, scratch-resistant, chemical-resistant
Body style: Sedan only
Maintenance: Rinse with water, quick drying
Installation: No tools or fasteners
Delivery: Product delivered folded; regains shape within 1 to 2 days in the vehicle
Contents: 1 trunk liner
Compatibility: Check according to the version and shape of the trunk before installation